01-15-2021, 12:51 PM | #521 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: clone exhaust
On page 1 of my Vc 460 thread you can see my exhaust system. Its very compact and very quiet. There is not a lot of space to work with on the yamaha G 14 with the clone swap.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-19-2021, 01:37 AM | #522 |
Not Yet Wild
Join Date: Dec 2020
Posts: 11
|
Re: clone exhaust
Here’s an update on my g22 rebuild.
6” Bmf AA lift 14” rims 23” tires (does not rub) Predator 670 Vc swap kit with vc tachometer (tach hasn’t came in yet) Still haven’t decided what muffler to go with but leaning towards the silent rider. |
01-19-2021, 08:39 AM | #523 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: clone exhaust
Nice build. As always can't wait to hear how everything works out. Carry on
|
02-22-2021, 01:40 PM | #524 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: clone exhaust
Bump
|
02-23-2021, 11:26 AM | #525 |
Gone Wild
Join Date: Mar 2016
Location: Brookings, SD
Posts: 216
|
Re: clone exhaust
[ATTACH][/ATTACH]4 or 5 years ago I put a VC460 in my EZGO. At that time here in the forum, they were talking about using small car mufflers. One of them was a Walker 22229. I used that with a 90° pipe to the header pipe. The out let end went into a J pipe with a SuperTrapp resonator/spark arrestor. The input end of the muffler kept cracking. I would weld it up and it would crack again. This winter I refabbed it all. I bought a new muffler and 2 J pipes. 1" OD pipe fits into the open ends of the VC craddle. I built a shelf with 2 2' pipes and a piece of flat iron. I also made a bracket that mounted to the rearend and is clamped to the muffler. I used a piece of stainless steel flex pipe to connect the header pipe to 1 of the J pipes.
|
02-23-2021, 11:29 AM | #526 |
Gone Wild
Join Date: Mar 2016
Location: Brookings, SD
Posts: 216
|
Re: clone exhaust
A couple more pictures, one is how it use to be. I did use a "F" bit and drilled the cradle and pipe. Then I tapped it with 5/16 threads to keep the shelf from coming out.
|
05-07-2021, 07:22 AM | #527 | |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: clone exhaust
Quote:
|
|
05-07-2021, 09:43 AM | #528 |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: clone exhaust
Bringing my cart home to make some changes, try to squeeze some 25's on it and likely be moving the axel back to do so. If so I will probably have to rework my exhaust some, so thinking of trying to quiet it a little bit more. Right now I have a 17903 Walker on it but not sure after reading this thread if the 22229 would be quieter. Thoughts?
|
05-07-2021, 11:06 AM | #529 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: clone exhaust
I don't have any personal experience putting the supertrapp as a muffler extension BUT there were several youtube videos that have.
|
05-07-2021, 12:59 PM | #530 |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: clone exhaust
I will check them out. Saw they aren't the cheapest thing to try so don't want to waste $100. Rather the wife get mad at me for something more fun
|
Tags |
g14 clone exhaust |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 clone exhaust too loud | Gas Yamaha | |||
clone exhaust pipe size | Clone Engine Swaps | |||
Your clone noisy? (non exhaust noise) | Clone Engine Swaps | |||
Clone Swap Exhaust!! | Clone Engine Swaps | |||
clone exhaust options | Clone Engine Swaps |