|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-17-2012, 02:51 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 7
|
94 club car drive clutch rebuild
Ok so have all the parts to rebuild my drive clutch. I have removed the clutch from the engine and have the puller to remove the clutch housing, but the housing will not move. Am I doing some thing wrong I do not want to strip any threads or crack the housing. I installed the 3 bolts with the grade 8 plate approximately a 1/2" into the housing and tightend on the center grade 8 bolt but nothing is happening and I do not want to ruin the end of the shaft. What am I doing wrong or do ineed to spray it with some pb blaster and try after a few hours of soaking?
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-17-2012, 03:10 PM
|
#2 |
|
Gone Wild
 Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: 94 club car drive clutch rebuild
You need a puller like this.
 |
|
|
|
|
04-17-2012, 03:30 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 7
|
Re: 94 club car drive clutch rebuild
have that too, that got the clutch off of the crank shaft, but now I need to seperate the clutch to rebuild.
|
|
|
|
|
04-17-2012, 04:29 PM
|
#4 |
|
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: 94 club car drive clutch rebuild
Did you remove the snap ring?
|
|
|
|
|
04-17-2012, 04:53 PM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 7
|
Re: 94 club car drive clutch rebuild
how do I get to the snap ring with the cover still on? I can't get to the snap ring with the cover on?
|
|
|
|
|
04-17-2012, 05:25 PM
|
#6 |
|
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: 94 club car drive clutch rebuild
do you have this drawing from the stickies at the top of the club car section? http://imageshack.us/photo/my-images...ve_clutch.jpg/
|
|
|
|
|
04-17-2012, 06:31 PM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 7
|
Re: 94 club car drive clutch rebuild
This is the wrong clutch this is a pre 88 clutch assembly mine is a 94 so it has the newer style.
http://imageshack.us/f/399/driveclutchrg4.jpg/ |
|
|
|
|
04-17-2012, 06:53 PM
|
#8 |
|
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: 94 club car drive clutch rebuild
Use a steering wheel puller with 3 bolts and screw 7/16 NF bolt in the clutch for the puller to push against. I always have to hit the puller with a 40oz hammer.
|
|
|
|
|
04-17-2012, 08:02 PM
|
#9 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 7
|
Re: 94 club car drive clutch rebuild
Got it thanks had to beat the H3.. out of it but it finally let loose yea!
|
|
|
|
|
05-31-2012, 08:51 PM
|
#10 |
|
Gone Wild
Join Date: Oct 2011
Location: Raleigh, NC
Posts: 243
|
Re: 94 club car drive clutch rebuild
Reviving a dead thread here but I'm trying to rebuild the drive clutch on my '99. I have the clutch off and I'm trying to get the cover off to access the buttons and weights. Will any steering wheel puller work or do you have to have the OEM cover puller that CPP sells here http://www.cartpartsplus.com/club-ca...er-puller.html
If I can just rent a steering wheel puller, that would be preferable but wasn't sure. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rebuild my harley drive clutch | Gas Harley Davidson | |||
| Drive Clutch Rebuild kit ? | Gas EZGO | |||
| 1993 club car ds fe290 clutch rebuild w/pic | Gas Club Car | |||
| Drive clutch rebuild | Gas EZGO | |||
| WTB drive clutch for 82-87 Club Car | Golf Carts and Parts | |||
Linear Mode
