|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-06-2017, 02:16 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 56
|
Alltrax SR48500 Detune to 300?
Hey guys, I just ordered a SR48500 for my 2003 EZGO TXT 36volt. I eventually want to upgrade everything to take advantage of the 500amp and maybe upgrade to 48v. But right now I just want to limit my 6yr old to about half speed. I hope I read correctly. This controller will do that correct? Also, until I can upgrade everything, can I just detune the controller to about 300 amp and keep from burning up my original FRN, and solenoids?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2017, 02:37 PM | #2 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Alltrax SR48500 Detune to 300?
If you ordered the optional shift on the fly option it will be just a matter of turning a dial, but it does not come with it.
Sent from my SM-G930R4 using Tapatalk |
06-06-2017, 02:47 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,411
|
Re: Alltrax SR48500 Detune to 300?
Yes you can turn down the max flow as low as you like.
The original was 275 amps but, that is not a guarantee the F&R won't fry I used to see that happen with stock controls when people had cargo boxes and hills. You can also experiment with a mode 2 speed limit and activate it with a switch. All that's needed is a 36v (+) supply and a 15 amp toggle switch In this second mode you can reduce top speed and acceleration rate - I hid my switch under the seat- now I have a 2 pole key switch so I can lock it in either mode. See my thread "Fun with Alltrax" where I activated mode 2 in reverse only for my hotrod. http://www.buggiesgonewild.com/elect...n-alltrax.html |
06-06-2017, 04:15 PM | #4 |
Not Yet Wild
Join Date: Jun 2017
Posts: 56
|
Re: Alltrax SR48500 Detune to 300?
scottyb,
That is exactly what I wanted to do. Low Speed for my kids and have a keyed switch to unlock full speed. Although I'm not exactly sure I follow your wiring description. Maybe it will be more clear once I get into the Alltrax software and wiring instructions. |
06-06-2017, 05:08 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,411
|
Re: Alltrax SR48500 Detune to 300?
The install diagram in the owner's manual shows what I'm talking about.
|
06-06-2017, 05:20 PM | #6 |
Not Yet Wild
Join Date: Jun 2017
Posts: 56
|
Re: Alltrax SR48500 Detune to 300?
Perfect! Thanks for you help!
|
Tags |
alltrax, sr48500 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR48500 throttle percentage issue | Electric Club Car | |||
SR48500 controller troubleshooting | Electric EZGO | |||
SR48500 Alltrax introduction thread | Announcements | |||
Wiring Alltrax SR48500 to 2000 EZGo | Electric EZGO | |||
Alltrax,Alltrax,Alltrax | Electric Club Car |