lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-08-2016, 05:03 PM   #1
brunson67
Getting Wild
 
brunson67's Avatar
 
Join Date: Jun 2015
Posts: 109
Default 48 volt club car solenoid wiring help

In the process of installing a new Super Heavy duty solenoid, 1997 Club Car 48 volt. Just want to make sure I have the wiring correct. Does below look correct?

Positive Large terminal post
 Battery cable goes from positive side of solenoid to positive #1 battery
 Small green to key switch
 Small red wire from OBC
Positive Small terminal post
 Small red wire to controller #1 spade connector
 Small white/black to micro switch F/R switch
Negative Large terminal post
 Large yellow cable to controller B+
Negative Small terminal post
 Small yellow wire to #3 controller spade connector
brunson67 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Club Cart 48 volt Solenoid-diode wiring Electric Club Car
97' club car 48 volt solenoid wiring Electric Club Car
Club Cart 48 volt Solenoid-diode wiring Electric Club Car
club car 48 volt no power to solenoid Electric Club Car
94 36 volt club car solenoid? Electric Club Car


All times are GMT -5. The time now is 08:25 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.