|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-18-2008, 05:40 PM | #1 |
Getting Wild
Join Date: Oct 2008
Location: Southeastern, VA
Posts: 79
|
Valve adjustment
I was hoping someone out there could advise me on the proper way to make valve adjustment on a Yamaha G-8. I understand the setting is .004 and made when cold, but, I'm not sure if the adjustment is made at TDC or when the opposite valve is in compression or somewhere else.
Thanks, George |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-18-2008, 06:55 PM | #2 |
Not Yet Wild
Join Date: Aug 2008
Location: Brookings, SD
Posts: 30
|
Re: Valve adjustment
TDC with both valves closed
|
10-19-2008, 04:45 PM | #3 |
Getting Wild
Join Date: Oct 2008
Location: Southeastern, VA
Posts: 79
|
Re: Valve adjustment
Thanks for the assist
George |
01-29-2009, 11:01 PM | #4 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Valve adjustment
is that the same for a g9? 0.04'' at tdc with them closed?
thanks for any help! |
01-29-2009, 11:33 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: Valve adjustment
It is the same for any internal combustion engine
|
01-30-2009, 08:40 AM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,009
|
Re: Valve adjustment
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-30-2009, 10:48 AM | #7 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Valve adjustment
thanks guys
|
02-04-2009, 04:25 PM | #8 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Valve adjustment
hey guys were is that adjustment made, i opened up my g9's valve cover and can't figure out were to measure???
|
02-04-2009, 04:34 PM | #9 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Valve adjustment
were do you measure the 0.004'' @ tdc under the valve cover??
i've got my cover off but don't know were to measure. oops sorry double post! |
02-04-2009, 04:40 PM | #10 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,217
|
Re: Valve adjustment
Saber cat put the tools down and think for two seconds. Do you have a feeler gauge or a micrometer.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Valve Adjustment procedure for '91 CC | Gas Club Car | |||
videos of my 2000 ez-go 4 cycle needing valve adjustment | Videos | |||
Valve Adjustment procedure for cp400 | Gas Club Car | |||
EZGO 295 - 350 engine Valve Adjustment | Ezgo Gas Tech | |||
help with valve adjustment | Gas Club Car |