|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-21-2012, 07:35 AM | #1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 31
|
how to wire tow/ run switch to dash?
I bought two fancy toggle switches with covers so i could move my tow switch and speed chip jumper to the dash. However when i opened the control unit box i noticed there are 4 wires on both speed chip jumper and the tow/ run toggle. How do i add in a switch to those four wires. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2012, 07:54 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: how to wire tow/ run switch to dash?
The run tow switch is, I believe, a DPDT switch. You can buy one in toggle or rocker style. I have seen them in 2 sizes lighted or colored...just google around the net for them.
|
04-21-2012, 10:40 AM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: how to wire tow/ run switch to dash?
Scotty's got the the Run/Tow switch covered.
You need to make/break the two jumper wires on the PDS Mode "chip" separately. You can get all four modes with two SPST switches or a 4 position rotary switch. I only use Freedom and Mild hill, so I only use one SPST switch that makes/breaks the jumper between pins 2 & 3. I have no need or desire to change modes on the fly, so my switches are still under the seat. |
|
|
Similar Threads | ||||
Thread | Forum | |||
How do you wire a key switch ignition ? | Gas Club Car | |||
melted the wire off my f/r switch! | Electric EZGO | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
converting to dash fwd / rev switch | Gas EZGO | |||
Hot wire behind f/r switch | Electric EZGO |