|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-06-2011, 10:14 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2011
Location: Clio, MI
Posts: 13
|
bore out on G16
Anyone know if there is a ring and piston set for .10 over? JN-6 301 motor!!
 My dads yami!! Overheated and warped. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-07-2011, 01:22 PM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: bore out on G16
I don't think you will find .100 O/S. I believe .050 O/S is max. But, I could be wrong.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
12-07-2011, 04:16 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2011
Location: Clio, MI
Posts: 13
|
Re: bore out on G16
Sorry guys my typo.......... .010(ten thousanths) OB we measured it at about .007 out of round
looking to take off minimal material if possible Last edited by Rob52; 12-07-2011 at 04:20 PM.. Reason: add info |
|
|
|
|
12-07-2011, 06:54 PM
|
#4 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: bore out on G16
G16's only have to oversided pistons available, .25 and .50 over. Standard bore 74.96mm-74.98mm, oversized 1-75.25mm and oversized 2-75.50mm. Rons right
 |
|
|
|
|
12-07-2011, 08:17 PM
|
#5 |
|
Not Yet Wild
Join Date: Jan 2011
Location: Clio, MI
Posts: 13
|
Re: bore out on G16
My dimwitted fault......didn't realize until I saw it closer it was mm and not standards....
.25mm is at .0098 thousanths, I'm good to go! Will boring out and installing larger piston & rings change much with carb mix? Is there a posting and /or shop manual recommended for the reassembly of the 301 motor? |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| bore clearances | Gas Yamaha | |||
| carb bore on g22 | Gas Yamaha | |||
| 341 bore questions?? | Gas Club Car | |||
| 89 clutch bore | Gas EZGO | |||
| G1 bore | Gas Yamaha | |||
Linear Mode
