|
11-04-2019, 04:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2019
Posts: 1
|
Primary and Clutches hitiing with new belt
I have just installed a new V belt for primary and secondary clutch on a 1966 Harley Davidson 3 wheel golf cart. when revved up the secondary clutch hits the primary clutch and sparks fly. Can anyone tell me why this happens?
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-04-2019, 05:13 PM
|
#2 |
|
Gone Wild
 Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Primary and Clutches hitiing with new belt
motor mounts is where id check first
|
|
|
|
11-11-2019, 06:46 PM
|
#3 |
|
Gone Wild
Join Date: Jan 2018
Location: Indy
Posts: 166
|
Re: Primary and Clutches hitiing with new belt
I had what sounds like the same issue on my 64 after a rebuild. I had used four new motor mounts, some of which were NOS, some possibly re-pops.
There seems to be very little room for play on this setup. Its possible my non-oem mounts are too soft a compound and allow too much motion. I was told by another forum member that he added extra spacers to the driver side mounts to prevent this from occurring. See here: http://www.buggiesgonewild.com/gas-h...n-problem.html |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need both clutches & belt for G16 - Want more power | Gas Yamaha | |||
| Mud, belt and Clutches | Lifted Golf Carts | |||
| Yamaha primary clutches | Gas Yamaha | |||
| primary clutches | Gas EZGO | |||
| belt position on clutches | Gas Club Car | |||
Linear Mode
