lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-17-2014, 11:02 AM   #1
chriskent85
Gone Wild
 
Join Date: Nov 2013
Posts: 706
Default DPI charger question

So the place where i get my DPI chargers at only had a 48v yamaha charger in stock. only two wires coming out of the charger. Can I use this one for a 48V conversion if I change out the plug, I know that ezgo has three wires, is the third wire necessary?
chriskent85 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-17-2014, 11:07 AM   #2
branson
Not here yet
 
branson's Avatar
E-Z-GO
 
Join Date: Sep 2013
Location: jupiter florida
Posts: 504
Default Re: DPI charger question

I have an ezgo and I bypassed the third wire it is a pack voltage sensor for the charger.
branson is offline   Reply With Quote
Old 05-17-2014, 11:16 AM   #3
chriskent85
Gone Wild
 
Join Date: Nov 2013
Posts: 706
Default Re: DPI charger question

But this charger is supposed to check voltage and turn it on to float charge. will it still work?
chriskent85 is offline   Reply With Quote
Old 05-17-2014, 11:31 AM   #4
yurtle
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: DPI charger question

If it does so with only two wires, I don't know why it wouldn't work. In fact, there's no good reason why the EZ-Go chargers use a third wire. It uses an inferior connection to the RADSOKs. My DPI charger works just fine with only two wires.

I'm assuming a Yamaha charger isn't like CC, which require an on-board computer to work.
yurtle is offline   Reply With Quote
Old 05-17-2014, 11:52 AM   #5
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: DPI charger question

Quote:
Originally Posted by chriskent85 View Post
So the place where i get my DPI chargers at only had a 48v yamaha charger in stock. only two wires coming out of the charger. Can I use this one for a 48V conversion if I change out the plug, I know that ezgo has three wires, is the third wire necessary?
Both my DPI Accusence chargers (36V & 42V) sense the battery pack voltage inside the charger and only have two wires in the output cables.

Here is a picture of the output cable (12/2 SJOOW) coming inside the charger and connecting to the PC Board assembly.

The Auxillary contact found in the EZGO Powerwise-D plug is not needed and is not connected.
Attached Images
File Type: jpg IMG_0065 1200x900.jpg (182.6 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 05-17-2014, 01:43 PM   #6
chriskent85
Gone Wild
 
Join Date: Nov 2013
Posts: 706
Default Re: DPI charger question

Thank you for the replies. Had myself scared that I payed for a charger I couldn't use
chriskent85 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
charger question Electric EZGO
Charger question Electric Club Car
DS Charger Question Electric Club Car
charger question Electric EZGO
charger question Electric EZGO


All times are GMT -5. The time now is 05:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.