02-06-2021, 09:03 AM | #1 |
Getting Wild
Join Date: Jun 2018
Posts: 103
|
Prepping for Vinyl Wrap Over Filler
I have a 2006 Club Car DS. I’m preparing to install 3M vinyl in camo.
I had multiple areas that I filled gouges and predrilled holes with JB Weld Plastic Filler. I sanded with medium grit and then wet sanded to 1000grit until smooth. There are flat area and a curved surface where I fixed a crack at the headlight. Can I wrap over these large bare areas and if not, what other prep should I do? Paint with glossy spray and sand smooth? Clear coat? If I paint do I need to scuff up the smooth areas so paint will adhere? About ready just to wrap this thing! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Vinyl wrap | Body and Paint | |||
Vinyl wrap a DIY job ? | Design Center | |||
Vinyl wrap.... where to buy?? | Electric EZGO | |||
vinyl wrap | Design Center | |||
Vinyl wrap | Electric EZGO |