I need bob boyce to program my controller.

TheCartBoy · 05-26-2023, 11:15 AM

Does it stay closed reliably? Or is it opening randomly while driving?

hawaiidragracer · 05-26-2023, 01:39 PM

once it closes, it is fine. I have to cycle the off/fwd/reverse switch a few times before the cart will move when I press the pedal. Sometimes, I flip the switch from off to forward, then step on the accelerator pedal, and nothing happens. I have to let off of the accelerator pedal, switch back to off, then forward a few times, and then it will go when I step on the accelerator. I just installed the new SW200 solenoid. It is the 36/48 v version. I will see if this problem still exists with the new solenoid, or if the old solenoid was causing the problem.

TheCartBoy · 05-26-2023, 01:48 PM

Was this always a problem on the cart? There is a HPD sequence that would prevent driving, like pressing the pedal before you turned the key to FWD or REV. That's unrelated to the type of solenoid you used - if you have a handset scanner see if you are getting an faults when it behaves like that.

dclapp · 09-11-2023, 06:36 PM

05-26-2023, 11:15 AM	#151
TheCartBoy WARRANTY VOID Join Date: Aug 2021 Posts: 1,668	Re: I need bob boyce to program my controller. Does it stay closed reliably? Or is it opening randomly while driving?

05-26-2023, 01:39 PM	#152
hawaiidragracer Not Yet Wild Join Date: May 2021 Location: Trenton, SC Posts: 22	Re: I need bob boyce to program my controller. once it closes, it is fine. I have to cycle the off/fwd/reverse switch a few times before the cart will move when I press the pedal. Sometimes, I flip the switch from off to forward, then step on the accelerator pedal, and nothing happens. I have to let off of the accelerator pedal, switch back to off, then forward a few times, and then it will go when I step on the accelerator. I just installed the new SW200 solenoid. It is the 36/48 v version. I will see if this problem still exists with the new solenoid, or if the old solenoid was causing the problem.

05-26-2023, 01:48 PM	#153
TheCartBoy WARRANTY VOID Join Date: Aug 2021 Posts: 1,668	Re: I need bob boyce to program my controller. Was this always a problem on the cart? There is a HPD sequence that would prevent driving, like pressing the pedal before you turned the key to FWD or REV. That's unrelated to the type of solenoid you used - if you have a handset scanner see if you are getting an faults when it behaves like that.

09-11-2023, 06:36 PM	#154
dclapp Not Yet Wild Join Date: Sep 2023 Location: Stuart Florida Posts: 13	Re: I need bob boyce to program my controller. Bump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Program Ez-go rxv bob boyce	Electric EZGO
Bob Boyce programmed my 2016 rxv fleet curtis controller	Electric EZGO
RXV controller not responding to upgrade handheld device to program controller	Electric EZGO
1999 DS program controller	Electric Club Car