|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
07-31-2019, 09:34 AM | #1 |
Not Yet Wild
Join Date: Aug 2010
Location: ChiTown
Posts: 5
|
G16 governor shaft / fork removal necessary. ?
Is it necessary (or recommended) to remove the governor arm, shaft and fork when completely bypassing the governor on a g16. ?
|
08-01-2019, 06:47 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G16 governor shaft / fork removal necessary. ?
Are you drilling out the governor arm and leaving the OEM cables in place--best choice IMO--, or running 1 cable direct to the carb?
I've got 3, all have the gov arm drilled and the gov shafts/forks are all in place. |
|
|
Similar Threads | ||||
Thread | Forum | |||
G16-G22 Governor Shaft | Gas Yamaha | |||
Tuning fork Emblem removal | Gas Yamaha | |||
Picture of Governor Fork? | Gas EZGO | |||
need shift fork and shaft for cc | Golf Carts and Parts | |||
1989 marathon 3 wheel front fork removal | Electric EZGO |