|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-18-2023, 10:16 PM | #1 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
E-z-go micro switch-pedalbox
E-Z-GO MICRO SWITCH-PEDALBOX
I am installing a briggs 18hp with the VC kit, Do I need to keep the two wires going into the pedal box area? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-19-2023, 12:32 AM | #2 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: E-z-go micro switch-pedalbox
Not if you are using key start now.
|
03-19-2023, 06:47 AM | #3 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: E-z-go micro switch-pedalbox
As CM said you don’t need the pedal microswitch if you’re going to be using key start.
Also the oem key switch gets power THROUGH the pedal microswitch, so you’ll need to run all new wiring to the key switch area. Really only an issue if you have a factory light kit or fuel gauge. If you don’t have factory lights I’d remove the entire wiring harness and all the electronics and just run your own new wires and extend the 3 or 4 wires going to that little key switch pod thing on the motor and relocate that Briggs key switch to the dash. |
03-19-2023, 08:13 AM | #4 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: E-z-go micro switch-pedalbox
Yes I will be using a briggs key switch on the dash
Yes I do have factory headlights |
03-19-2023, 08:42 AM | #5 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: E-z-go micro switch-pedalbox
Can I leave the micro switch in place and just remove the two wires, or should I remove the micro switch?
|
03-19-2023, 09:05 AM | #6 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: E-z-go micro switch-pedalbox
Leaving it there won’t hurt anything. If you just connect the 2 wires together it will bypass that switch all together if you want to leave the stock wiring harness in tact.
|
03-19-2023, 09:58 AM | #7 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: E-z-go micro switch-pedalbox
I'm trying to clean up all the wiring and remove as much as possible
|
03-19-2023, 03:25 PM | #8 |
Gone Wild
Join Date: Nov 2021
Location: NW Indiana
Posts: 717
|
Re: E-z-go micro switch-pedalbox
It's out, thanks for the help
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Series F/R switch micro switch wiring? | Electric EZGO | |||
Wiring Alltrax for reverse with single micro-switch F&R switch... | Electric Club Car | |||
TXT micro switch ITS or key switch problems | Electric EZGO | |||
Micro Switch issue or F & R switch. | Electric EZGO | |||
Micro switch on fwd and rev switch has bee removed | Electric EZGO |