|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-06-2020, 09:27 AM | #1 |
Not Yet Wild
Join Date: Mar 2020
Posts: 42
|
94 EZGO Controller Recommendation
Hi all!
I’m helping a guy replace a few things in his 94 EZGO (appears to be a medalist). It currently has a Curtis 1205-101 in it that needs to be replaced. Would anyone like to recommend a reasonable replacement? He is essentially rebuilding his cart for his kids to drive around their flat ground. Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-06-2020, 09:30 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 94 EZGO Controller Recommendation
Use the Alltrax SR48400 -0-5k Controller. Can be used with everything else stock in the cart.
|
04-06-2020, 10:19 AM | #3 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 94 EZGO Controller Recommendation
X2, and you can get it from Scotty
|
04-06-2020, 11:30 AM | #4 | |
Not Yet Wild
Join Date: Mar 2020
Posts: 42
|
Re: 94 EZGO Controller Recommendation
Quote:
Here is a link to the exact one I have: https://www.golframa.com/search/?s=G534H&t=1 It has your 4 large connections as well as the three on the side. Here are the only connections on the current controller: J1-J3 B- B+ M- A2 |
|
04-06-2020, 12:34 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 94 EZGO Controller Recommendation
Nobody uses the 4 large terminal controller any more. They have been phased out because the A2 function burned the controllers up.
The conversion from 4 to 3 big terminals is simple. You can do this to any 4 terminal control. Remove the 2 cables connected to controller A2 and bolt them together in mid air creating one cable which goes from Motor A2 to F&R bypassing the controller. That it's - and if you did it this way, as I did my first time, be sure to put a ton of electric tape on the bolt so it doesn't short out... better to just get a longer cable or a whole fresh set if you are upgrading the control |
Tags |
controller, curtis, ezgo |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2009 yamaha drive controller recommendation | Electric Yamaha | |||
1999 EZGO DCS Need Recommendation on New Controller | Electric EZGO | |||
04 series club car DS controller recommendation | Electric Club Car | |||
Yamaha G9 potbox, recommendation for controller to pair it with. | Electric Yamaha | |||
Controller recommendation | Electric EZGO |