|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
09-01-2013, 02:06 PM | #751 |
Gone Wild
Join Date: May 2011
Posts: 266
|
Re: Programming Curtis Controller
The original link seems to have died due to Parallax updating their site.
NEW link. http://www.parallax.com/product/28031 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-02-2013, 07:07 PM | #752 |
Not Yet Wild
Join Date: Feb 2012
Location: anderson, sc
Posts: 34
|
Re: Programming Curtis Controller
woody: I thought I posted you? I have a 1314-4401 . do i need a 312 update to program a1244?: bigbooper
|
09-03-2013, 01:57 AM | #753 |
Gone Wild
Join Date: May 2011
Posts: 266
|
Re: Programming Curtis Controller
Since the old 1314 programming station prog ( Version 3.12 ) became common out on the web , Curtis updated to a newer version the 1314 programming station ( version 4.2.* ) and embedded some code so as to require the end user to have a specific Curtis USB lead, the 1309.
So you should be able to use either program .. The older 1314 with one of the USB leads suggested on this thread ...OR .. the newer program with a Genuine Curtis 1309 lead. Note that the 1309 lead should be OEM as it sets the access level. Last edited by woodygb; 09-03-2013 at 03:48 AM.. Reason: pics added |
09-03-2013, 07:29 AM | #754 |
Not Yet Wild
Join Date: Feb 2012
Location: anderson, sc
Posts: 34
|
Re: Programming Curtis Controller
woody : I have a couple leads talking to my computer and have 1314 - 4401 is this enough ? george
|
09-03-2013, 07:50 AM | #755 |
Gone Wild
Join Date: May 2011
Posts: 266
|
Re: Programming Curtis Controller
I see no reason why not ... other than perhaps the OLD 1314 software perhaps not containing relevant updates for a later controller... try it.
I should perhaps ask why you haven't tried? |
09-03-2013, 08:01 AM | #756 |
Not Yet Wild
Join Date: Feb 2012
Location: anderson, sc
Posts: 34
|
Re: Programming Curtis Controller
woody I had the simulation mode up yesterday it was for a wheel chair , mc-2, other options were serial and enhanced serial ? when I get it all hooked up will it read my controller? george
|
09-03-2013, 08:10 AM | #757 |
Not Yet Wild
Join Date: Feb 2012
Location: anderson, sc
Posts: 34
|
Re: Programming Curtis Controller
first option's were user,service,dealer oem, other's were in simulation
|
09-03-2013, 08:37 AM | #758 |
Gone Wild
Join Date: May 2011
Posts: 266
|
Re: Programming Curtis Controller
I can only say that it should read your controller and the mode should be serial or enhanced serial...the MC2 / Q-Logic wheelchair controller talks via a CANBUS interface..
|
09-03-2013, 11:52 AM | #759 |
Not Yet Wild
Join Date: Feb 2012
Location: anderson, sc
Posts: 34
|
Re: Programming Curtis Controller
woody : do you have peramatuers , i'm down to that , i'm using 9600 , 8,n 1
|
09-03-2013, 12:19 PM | #760 |
Gone Wild
Join Date: May 2011
Posts: 266
|
Re: Programming Curtis Controller
I've never had to bother with setting the parameters.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
curtis 1206sx controller | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts | |||
wanted curtis pmc controller | Golf Carts and Parts | |||
troubleshooting curtis controller | Electric EZGO | |||
wanted: curtis pmc controller | Golf Carts and Parts |