|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
11-15-2022, 09:01 PM | #1731 | |
Not Yet Wild
Join Date: May 2021
Posts: 6
|
Re: Programming Curtis Controller
Quote:
the link is down. Do you still have the software to program an ACD4805? thank you very much! |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-15-2022, 11:17 PM | #1732 |
Gone Wild
Join Date: Apr 2008
Posts: 2,225
|
Re: Programming Curtis Controller
theres a you tube video on this with a link to software that works.
|
11-28-2022, 09:48 AM | #1733 |
Gone Wild
Join Date: Oct 2019
Posts: 646
|
Re: Programming Curtis Controller
Pretty interesting - hadn't seen this before. Basically a single use "pre-programmed programmer" for ~$150-200...
https://fastrxv.com/ |
11-28-2022, 10:05 AM | #1734 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: Programming Curtis Controller
For that you can go to your local dealer and have them do it.
|
11-28-2022, 10:18 AM | #1735 |
Gone Wild
Join Date: Oct 2019
Posts: 646
|
Re: Programming Curtis Controller
Some won't do it though, and I'd venture a guess that others either don't know how or don't have the access level that this thing may or may not have - don't know.
I'd just be curious to know what the results from one are, and then look at the programming and see what it did. |
11-28-2022, 06:51 PM | #1736 |
Gone Wild
Join Date: Apr 2008
Posts: 2,225
|
Re: Programming Curtis Controller
|
11-28-2022, 09:59 PM | #1737 |
Gone Wild
Join Date: Oct 2019
Posts: 646
|
Re: Programming Curtis Controller
|
11-28-2022, 10:03 PM | #1738 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: Programming Curtis Controller
Unless you have the cable setup in developer access you can’t can’t set it to freedom mode so you either need the ezgo dongle or this board from fast RXV. Once set you can tweak things.
|
11-28-2022, 10:09 PM | #1739 | |
Gone Wild
Join Date: Apr 2008
Posts: 2,225
|
Re: Programming Curtis Controller
Quote:
I've seen multiple you tube videos showing how to wire up the cable and program them with software like this, https://www.youtube.com/watch?v=JO7O9O8rx0Y |
|
11-28-2022, 10:20 PM | #1740 | |
Gone Wild
Join Date: Oct 2019
Posts: 646
|
Re: Programming Curtis Controller
Quote:
Locked or otherwise, developer access level is needed to alter certain parameters, and AFAIK that isn't easily obtained with the video you mention or some of the methods in this thread. That is why this device could be interesting - it may be able to adjust those values. My point wasn't to state this is a better alternative to doing it yourself, but mainly to point out that such a device exists and see if anyone has any experience with one. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
curtis 1206sx controller | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts | |||
wanted curtis pmc controller | Golf Carts and Parts | |||
troubleshooting curtis controller | Electric EZGO | |||
wanted: curtis pmc controller | Golf Carts and Parts |