10-06-2019, 10:30 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 3
|
Install of SW180 Solenoid on 412 Melex
I recently upgraded my controller to the Alltrax SR48300 and bought the combo through cartsunlimited.net. In the interest of sparing Scotty having to answer the same questions from another Melex owner, I document my experiences here. I have included some wiring diagrams that were also helpful in diagnosis. For your edification, the 512 diagram *seems* identical to the 412. With respect to the solenoid diagram, my experience is that for the 412, from left to right, the Power Harness wire in the diagram refers to A1; the yellow wire refers to conjoined wires (black and green) that run to B- on the controller and the bottom of the F&R controller, respectively. Small post on the right is a conjoined red wire that runs to the red J1 terminal and the throttle control. Conjoined red and blue wires mount to the B+ post which run to the reverse alarm and key switch, respectively, along with the cable to B+.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2020, 07:59 PM | #2 |
Not Yet Wild
Join Date: Nov 2017
Posts: 14
|
Re: Install of SW180 Solenoid on 412 Melex
I sure could use a wiring diagram for the 412. But can’t really see much on the one you posted
|
01-17-2020, 09:09 PM | #3 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Install of SW180 Solenoid on 412 Melex
|
Tags |
412 solenoid upgrade |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need wiring help for Albright SW180 Solenoid | Electric Club Car | |||
Curtis SW180 solenoid wiring issue | Electric Club Car | |||
Sw180 solenoid diod and red/blk wiring | Electric EZGO | |||
Dcx and sw180 solenoid install help | Electric EZGO | |||
Melex 252 solenoid question | Melex |