Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0?

jakehanl · 10-30-2018, 02:50 PM

Just curious to know how Yamaha originally configured their throttle wiper board; as to whether it was 5k-0 or 0-5k? Reason for the question is that the person who had the cart before me had installed a Curtis PMC 1204-410; which I believe is a 5k-0. Thus made me wonder is the original wiper board was the sam 5k-0 or not. I was planning to install a PB-6 shortly, but I understand that they are only 0-5k; therefore made me think that even attempting to try the cart with the controller in their now might not work?

LukeL · 10-30-2018, 02:55 PM

That’s setup for 0-5k I’m sure. Originally it was nothing, as it was a resistor cart.

Most Curtis 1204’s are 0-5k input.

Club Car DS driver’s club #59

jakehanl · 10-30-2018, 02:58 PM

What's weird is that when you look up the model Curtis PMC 1204-410 it shows that controller as a 5k-0. Check out this chart...

https://www.ddmotorsystems.com/ContCrossRefCurtis.htm

That's why I'm a bit confused about this, and since I already ordered a PB-6 I got worried because it is only a 0-5k unit.

Thoughts?

[IMG]

[/IMG]

10-30-2018, 02:50 PM	#1
jakehanl Gone Wild Join Date: Jan 2015 Posts: 239	Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0? Just curious to know how Yamaha originally configured their throttle wiper board; as to whether it was 5k-0 or 0-5k? Reason for the question is that the person who had the cart before me had installed a Curtis PMC 1204-410; which I believe is a 5k-0. Thus made me wonder is the original wiper board was the sam 5k-0 or not. I was planning to install a PB-6 shortly, but I understand that they are only 0-5k; therefore made me think that even attempting to try the cart with the controller in their now might not work?
jakehanl Gone Wild Join Date: Jan 2015 Posts: 239

10-30-2018, 02:55 PM	#2
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0? That’s setup for 0-5k I’m sure. Originally it was nothing, as it was a resistor cart. Most Curtis 1204’s are 0-5k input. Club Car DS driver’s club #59

10-30-2018, 02:58 PM	#3
jakehanl Gone Wild Join Date: Jan 2015 Posts: 239	Re: Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0? What's weird is that when you look up the model Curtis PMC 1204-410 it shows that controller as a 5k-0. Check out this chart... https://www.ddmotorsystems.com/ContCrossRefCurtis.htm That's why I'm a bit confused about this, and since I already ordered a PB-6 I got worried because it is only a 0-5k unit. Thoughts? [IMG][/IMG]
jakehanl Gone Wild Join Date: Jan 2015 Posts: 239

Similar Threads
Thread	Forum
cleaning contacts on wiper board	Electric EZGO
2013 RXV Curtis: Throttle wiper fault	Electric EZGO
1988 Marathon Electric - Arcing Wiper Board - Tried Everything, Need Ideas	Electric EZGO
Wiper board sparkes and smokes	Electric EZGO
Resistor wiper contact board	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum