|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-09-2021, 04:59 PM | #1 |
Not Yet Wild
Join Date: Jan 2020
Posts: 3
|
New solenoid now it just goes
84 ezgo 36vdc I put on new solenoid. An now it will go with pressing pedal. If would of put on a wrong wire in wrong place on the solenoid would it do that? Or do I have a bad forward and reverse controller issue? Or do I have a bad micro switch? It is the old school resistor cart and it has all new batteries. Plus new coils. Ran great until I replaced solenoid.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Solenoid Not Clicking after installing new Batteries and new Solenoid | Electric EZGO | |||
1989 Club Car DS 36v -New Vglide/Solenoid/microswitches Only moves when solenoid jump | Electric Club Car | |||
Wrong Solenoid in my cart? w/ Pics- Please suggest correct solenoid I should be using | Electric EZGO | |||
Solenoid not engaging with Forward / Reverse switch? (Solenoid is good) | Electric EZGO | |||
Help converting G1 solenoid setup to single G16 solenoid | Gas Yamaha |