|
|
|||||||
| Design Center Shop tools, fabrication and Paint and Body |
  |
|
|
Thread Tools | Display Modes |
08-31-2007, 06:43 PM
|
#1 |
|
Gone Wild
Join Date: Aug 2007
Location: Jerusalem AR
Posts: 214
|
G9 swing arm drop
First of all Thanks New Guy for all your help. Now that I've kissed up
 heres how my brackets turned out:C SA drop and MM (2).JPG C SA drop and MM (1).JPG C SA drop and MM (3).JPG Dropped the swing arm 4" and moved the rear wheels back 2". |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-01-2007, 03:50 PM
|
#2 |
|
Fry's Golf Carts
 Join Date: Dec 2006
Location: Central Michigan
Posts: 857
|
Re: G9 swing arm drop
Those brackets look really good. Are they just a bolt on installation? Or is there some welding in their that I didn't see.
|
|
|
|
|
09-01-2007, 04:43 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2007
Location: Central Point, Oregon
Posts: 20
|
Re: G9 swing arm drop
Ya and how much would you sell them to us for?
|
|
|
|
|
09-01-2007, 04:51 PM
|
#4 | |
|
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: G9 swing arm drop
Quote:
|
|
|
|
|
|
09-01-2007, 08:44 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2007
Location: Jerusalem AR
Posts: 214
|
Re: G9 swing arm drop
I wish I had pics before I welded but they are easy to make if you have a welder. I made a cardboard sample and cut out the pieces.
They are made of 2" wide bar stock (1/8 thick) and slip over the factory SA brackets. I held them in place by installing upper bolts through factory brackets, then reinstalling SA in lower holes on new bracket. Once everything was in, I drilled the top plates and bolted through the top of the factory bracket. I wish I had some for sale but by the time I gave NewGuy his cut I would loose money.  |
|
|
|
|
09-02-2007, 07:33 AM
|
#6 |
|
Ragged Squirrel
Join Date: Aug 2007
Location: hartland,maine
Posts: 274
|
Re: G9 swing arm drop
bryan,
nice job on your drop brackets, they look sweet. mike |
|
|
|
|
09-02-2007, 01:13 PM
|
#7 | |
|
Fry's Golf Carts
Join Date: Dec 2006
Location: Central Michigan
Posts: 857
|
Re: G9 swing arm drop
Quote:
|
|
|
|
|
|
09-04-2007, 07:10 PM
|
#8 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G9 swing arm drop
Hey, I recognize them!!!! Nice job.
 "I wish I had some for sale but by the time I gave NewGuy his cut I would loose money" No cut required!!! Glad to help. |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
11-23-2007, 02:25 PM
|
#9 |
|
Not Yet Wild
Join Date: Nov 2007
Location: salt lake city ut
Posts: 37
|
Re: G9 swing arm drop
hey nice job i like how clean it all look ,heres how i did mine g- ,set up with a
set himes joints |
|
|
|
|
11-24-2007, 08:54 AM
|
#10 |
|
Ragged Squirrel
Join Date: Aug 2007
Location: hartland,maine
Posts: 274
|
Re: G9 swing arm drop
dk,
just curious...why hiem joints for your drop? |
|
|
|
|
|
||||||
|
|
Linear Mode
