|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
08-11-2007, 08:41 PM | #1 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
G9 frame repair w/swing arm drop
Time to replace the cross member after 16 years of rusting and corroding from poor battery maintenance (before it was mine). The material was getting thin and my first design swing arm drop added some leverage. Check out these cracks.
100_1547.jpg Old piece out and preping for the new one. 100_1551.jpg 2" sq x 3/16 tube. About 3 times the thickness of the stock tube. 100_1558.jpg High tech engineering Using 4" sq x 1/4 tube. 100_1565.jpg Fit up with the swing arm in place and ready to tack. 100_1567.jpg More pics to follow....... Last edited by TheNewGuy; 08-11-2007 at 08:45 PM.. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha Frame Repair | Gas Yamaha | |||
Pictures and Descriptions of Swing Arm Drop! | Gas Yamaha | |||
Frame repair | Electric EZGO | |||
frame repair | Electric golf carts | |||
G9 swing arm drop | Design Center |