Club car goes then stops

[BRADCARTER]

There are no small yellow wire only big one

[TahoeDawgZ71]

Originally Posted by BRADCARTER

There are no small yellow wire only big one

That all goes back to where I asked you to identify the drive system. We still haven't gotten that far. Without properly identifying the drive system, it's hard to diagnose an issue. Take some pictures and post them.

[CCFanatic]

Is my CC Series or Sepex.jpg

[glassk]

Originally Posted by BRADCARTER

I tested the yellow wire and it sparks when I touch it to the NEGWhen I got home today before testing any wires the car would go then stop then go then stop repeatedly until I let of the throttle. Once I let off the throttle it wouldn't do anything. I have cleaned all corrosion and rust from every connection motor still clicks when I push the pedal. But doesn't go

Does it still spark,...??

[BRADCARTER]

Having a hard time loading. Hope this works

[BRADCARTER]

Here are some pics

[BRADCARTER]

Another pic

[CCFanatic]

Ok, looks like you have a Regen 2 system rather than a Series drive system. David will advise with the correct procedure

[TahoeDawgZ71]

It's definitely a Regen2. Let's start with the basics... Do both solenoids click when you press the pedal? They should both click at the same time. Sometimes it's hard to tell if they're both clicking since they work simultaneously. With the aid of an assistant, put your hand on the base of the solenoid and you should be able to tell if it's clicking. Try it with both of them and make sure they're both working. Let me know.

[BRADCARTER]

Both solenoids click at the same time.