|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-05-2010, 11:43 AM | #1 |
Not Yet Wild
Join Date: Jan 2010
Location: Elloree,SC
Posts: 28
|
Question about wires,motor
Hey Y'all,first post.I recently bought a 2001 PDS (first cart). Before the week was out I lifted it 5 "s with 22x11x8 tires.Then I found this forum and saw where 4 ga wires were recommended.I bought a set on Ebay and when i went to install them the wires on my cart batteries were twice the diameter of the new ones.The wires going to the controller were about half the size of the new ones however.It also had a yellow chip installed. I put on the new wires anyway.Could the old wires be 2ga ? The wires going the motor were the same size as the new 4ga.
Later three of us big guys where in the woods when the cart stopped pulling.Two got off and the cart made it back to the dirt road with no more problems. The wires were warm but not really hot. I guess I need a new controller and maybe a motor? I plan on doing more off roading than on. Any suggestions or recommendations would be appreciated. By the way,this is an AWSOME sight. Thanks, Big John |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-05-2010, 11:53 AM | #2 |
Gone Wild
Join Date: Sep 2009
Location: Forest City N.C.
Posts: 2,660
|
Re: Question about wires,motor
Sounds to me like you overloaded the cart.You have to realize they were only made for 2 passengers and 2 golf bags.
|
02-05-2010, 12:51 PM | #3 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Question about wires,motor
Did you upgrade the controller as well?
|
02-05-2010, 01:10 PM | #4 |
Not Yet Wild
Join Date: Jan 2010
Location: Elloree,SC
Posts: 28
|
Re: Question about wires,motor
Not yet. I don't know weather to get an alltrax 400 or 500 amp.If I get a bigger motor the 500 should be better? I just don`t know what to do.
|
02-05-2010, 01:15 PM | #5 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Question about wires,motor
|
|
|
02-05-2010, 01:24 PM | #6 |
Not Yet Wild
Join Date: Jan 2010
Location: Elloree,SC
Posts: 28
|
Re: Question about wires,motor
I hate to ask a stupid question but,What exactly does the solenoid do ?
|
02-08-2010, 08:43 PM | #7 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Question about wires,motor
|
02-10-2010, 07:16 PM | #8 |
Not Yet Wild
Join Date: Jan 2010
Location: Elloree,SC
Posts: 28
|
Re: Question about wires,motor
I put on an Alltrax 400 and a heavy duty solenoid today. Cart hauls A$$ and pulls great !
Thanks for the help. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Wires from FNR switch to motor getting VERY hot! | Electric EZGO | |||
Motor Question | Electric Club Car | |||
Motor Question | Electric EZGO | |||
Motor question | Gas Club Car | |||
PDS Motor Question | Electric EZGO |