|
06-04-2014, 10:27 AM | #1 |
Not Yet Wild
Join Date: Jun 2014
Posts: 17
|
16 pin connector
Hello all, I,m new to the site so bear with me. I have an 08 cc precident I jus t purchased, the problem i'm having is a couple of wires in the 16 pin connector that connects to the motor controller have corroded and broke. Does anyone know of a replacement pig tail for this or a fix? Thanks in advance for help.
Last edited by glasscockjason; 06-04-2014 at 10:55 AM.. Reason: mis labled part |
06-04-2014, 01:21 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: 16 pin connector
Connector - Molex Mini-Fit Jr. Series 5557
Female socket: Series 5556 (18-24 gauge wire) Terminal extraction tool You will also need a good non-insulated terminal crimper. |
06-04-2014, 02:46 PM | #3 |
Not Yet Wild
Join Date: Jun 2014
Posts: 17
|
Re: 16 pin connector
Thanks for the info,got them ordered.
|
06-04-2014, 03:13 PM | #4 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: 16 pin connector
In most cases just to do one little connector you can skip the extractor and just push the pin out with a small screwdriver, you're replacing it anyways.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Ignitor connector | Gas Yamaha | |||
WTB Curtis 16-pin Connector | Golf Carts and Parts | |||
Help identifying connector | Electric EZGO | |||
Where is the six pin connector | Electric EZGO | |||
PDS J2 connector Question | Electric EZGO |