Replace cables from batteries to motor?

ksmith247 · 06-16-2009, 05:28 PM

36 volt E-Z-Go 2005 TXT (I think)

So I had some corrosion issues and my wife picked up a set of 4 ga battery cables today. I installed them and the batteries are now charging.

There are two cables (passenger side) that leave the batteries and go to what I guess is the motor. One of these cables is breaking and needs replacing. I started to take off the cover with the two hex head screws at the top but soon realized that there are two screws at the bottom too! How in the world are you supposed to get to these?

AARGH!

Any advice is appreciated.

06-16-2009, 05:28 PM	#1
ksmith247 Not Yet Wild Join Date: Jul 2008 Location: Powder Springs, GA. Posts: 6	Replace cables from batteries to motor? 36 volt E-Z-Go 2005 TXT (I think) So I had some corrosion issues and my wife picked up a set of 4 ga battery cables today. I installed them and the batteries are now charging. There are two cables (passenger side) that leave the batteries and go to what I guess is the motor. One of these cables is breaking and needs replacing. I started to take off the cover with the two hex head screws at the top but soon realized that there are two screws at the bottom too! How in the world are you supposed to get to these? AARGH! Any advice is appreciated. Last edited by ksmith247; 06-16-2009 at 05:31 PM.. Reason: courtesy

Similar Threads
Thread	Forum
Replace cables	Electric EZGO
Cables batteries etc	Electric EZGO
bring batteries back to life dont replace	Electric EZGO
86 Yamaha Electric New Batteries New Cables Still won't GO!	Electric Yamaha