|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
01-08-2013, 11:54 AM | #1 |
Not Yet Wild
Join Date: Jan 2013
Location: North Wales, UK
Posts: 4
|
1314 pc programming station, desperately need a copy please
Hi all
I have been trying to find this soft' to allow me to set up my curtis controllers. Al I can find is a dead link Can someone let me have a copy, I could even pay a little if needs be but I am only a poorper hobbyist My email is in attached txt document Thanks in advance for any help you can give John |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-08-2013, 02:49 PM | #2 |
Not Yet Wild
Join Date: Dec 2012
Location: West Coast
Posts: 5
|
Re: 1314 pc programming station, desperately need a copy please
From My research it is a Copyrighted Piece of software that requires a Special Cable and hardware that makes it connect to the 1314, The Software alone will not help! Normally the supplier of the curtis controller will program it for you!
|
01-09-2013, 05:14 PM | #3 |
Not Yet Wild
Join Date: Jan 2013
Location: North Wales, UK
Posts: 4
|
Re: 1314 pc programming station, desperately need a copy please
Hi
It is just the software i need, quite a lot of folks have freely downloaded it in the past but the link is now dead. It is to use on 1244 controls, I have a user level hand programmer but you can't set the throttle type or motor sizes with that programmer. The cable it just a modified serial port lead/connection, loads of info available how to do it. Thanks for your reply John |
09-14-2013, 05:11 PM | #4 |
Not Yet Wild
Join Date: Sep 2013
Posts: 18
|
Re: 1314 pc programming station, desperately need a copy please
Did u ever find a copy of the 1314 software, I'm in the same boat.....need a copy bad.....sos
|
09-14-2013, 06:02 PM | #5 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 1314 pc programming station, desperately need a copy please
No warez allowed.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Is anyone using the curtis 1314 software | Electric Club Car | |||
Hi can't find anywhere 1314 pc programming station | Electric golf carts | |||
putting 1996 non dcs cart back together need help! desperately | Electric EZGO |