lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-21-2021, 07:35 PM   #1
Renarderickson
Not Yet Wild
 
Join Date: Jun 2021
Posts: 11
Default G22 gas rear axle input shaft....need a coupler or a sprocket.

I've searched and searched, then I searched some more.
Does ANYONE out there know where to look for a sprocket or maybe a coupler that will fit the Yamaha rear axle input shaft. It's a 19 spline .967 ish bore. I'm swapping a 200sx motor into my cart and this little sprocket would save me a TON of messing around. Thanks all.
Renarderickson is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Yamaha G9(?) Rear end input shaft splines. What sprocket will work? Big Block Talk!
Measurements for 19 spline coupler on input shaft Electric EZGO
2010 TXT Input Shaft & Coupler Worn - Grinding Electric EZGO
Whining Noise after input shaft & coupler replacement Electric EZGO
chain drive input shaft sprocket assy Golf Carts and Parts


All times are GMT -5. The time now is 01:18 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.