|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-21-2021, 12:54 PM | #1 |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Secondary clutch ramps not riding on ramp buttons
It seems after I torque down the secondary clutch (red spring china special clutch from Amazon) it slips when in drive and the ramps of the clutch try to ride on the opposite ramp of the clutch and scrape (not riding on buttons). So i line it all back up and tighten it down but it still shifts and wont ride on the clutch buttons. Do I need to torque it more? I'm using a wrench and helper bar to get it very tight with using my body weight (fat guy).
I will try and post pictures as well.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-21-2021, 12:56 PM | #2 |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Re: Secondary clutch ramps not riding on ramp buttons
See pictures
|
06-21-2021, 01:19 PM | #3 |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Re: Secondary clutch ramps not riding on ramp buttons
Another note. I still have the stock spring, maybe i should put that back in.
|
06-21-2021, 03:28 PM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Secondary clutch ramps not riding on ramp buttons
Even though the Red spring doesn't have "tangs" like stock springs for "preload" settings, you still must get the spring seat ramps on the other side of the sliding sheave before putting in the woodruff key/ the fixed sheave and the nut. IMHO, get rid of the red spring, it will cause only wear problem. Good luck.
|
06-21-2021, 03:48 PM | #5 |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Re: Secondary clutch ramps not riding on ramp buttons
well screwed things up now. while tightening the bolt for the secondary clutch it sheered off the end of the input shaft! going to get the welder out.
|
06-21-2021, 03:54 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Secondary clutch ramps not riding on ramp buttons
Crap!!!!!
|
06-21-2021, 05:27 PM | #7 |
Getting Wild
Join Date: May 2021
Location: Minnesota
Posts: 125
|
Re: Secondary clutch ramps not riding on ramp buttons
|
07-01-2021, 05:55 AM | #8 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Secondary clutch ramps not riding on ramp buttons
I'm thinking that shaft was already cracked, nothing that tightening a bolt would do. Don't feel bad. It happens to the best of us. Oh, and I would not weld that thing. Get a new one.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Effect of Worn Secondary Helix Ramps | Gas Yamaha | |||
secondary clutch vibrating and belt not riding all the way down | Gas Yamaha | |||
How do you replace ramps in drive clutch? | Gas EZGO | |||
Wear on clutch ramps | Gas Club Car | |||
1981 EZGO Clutch buttons (ramps) | Gas EZGO |