lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint

Post New Thread  Reply
Thread Tools Display Modes
Old 02-06-2021, 09:03 AM   #1
Getting Wild
Join Date: Jun 2018
Posts: 97
Default Prepping for Vinyl Wrap Over Filler

I have a 2006 Club Car DS. Iím preparing to install 3M vinyl in camo.

I had multiple areas that I filled gouges and predrilled holes with JB Weld Plastic Filler.

I sanded with medium grit and then wet sanded to 1000grit until smooth.

There are flat area and a curved surface where I fixed a crack at the headlight.

Can I wrap over these large bare areas and if not, what other prep should I do? Paint with glossy spray and sand smooth? Clear coat? If I paint do I need to scuff up the smooth areas so paint will adhere?

About ready just to wrap this thing!
Attached Images
File Type: jpeg 421987B1-9414-4E51-9027-F0B4FBF2B5B8.jpeg (372.4 KB, 0 views)
File Type: jpeg AF5B1EBF-49B4-4EB4-BD8B-0FE1292EA135.jpeg (418.8 KB, 0 views)
Sethmac is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint

Thread Tools
Display Modes

Similar Threads
Thread Forum
Vinyl wrap Body and Paint
Vinyl wrap a DIY job ? Design Center
Vinyl wrap.... where to buy?? Electric EZGO
vinyl wrap Design Center
Vinyl wrap Electric EZGO

All times are GMT -5. The time now is 10:17 AM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of © 2006-2017 All rights reserved.