Navitas 600 with OTF Programmer

[super jim]

Is there someone able and willing to remote tune the controller via my app? In other words, I show what my app setting are and send a data log. This person reviews it and recommends what changes I should make to optimize the tune.

[super jim]

So Roypow said they recommend to limit the top speed at 20mph or less. Due to the over discharge current protection would start at 200amps last 10 seconds. wounds pretty conservative on speed. I recall reading where someone thought that current draw rating may be conservative since they had been running wide open in I think mid 30 mph for extended times and never tripped the over draw protection.

I'm thinking I can set the number higher in my Navitas app and just turn down the speed with the on-the-fly programmer, correct?
Then If I want more speed for a short time I can dial it up. Does that make sense?

Anyone else have some experience and data on this?

[super jim]

RoyPow internal BMS

https://www.roypowusa.com/?page_id=28532

[mccainc]

You can independently limit the battery discharge current, and maximum speed using the Navitas app. So depending on what you have set, your speed will either be limited by current supplied to the motor, or your top speed setting.


Sent from my iPad using Tapatalk