G16 Secondary clutch

bogeyman · 07-14-2009, 02:59 PM

Hello, Just wondering if any one could explain if i have to preload the stock spring on the secondary clutch, and if so how do i do this, I had to remove clutch to replace a bearing in rear end,

dirtysouth · 07-14-2009, 03:06 PM

Put the spring in B 4 and as you install it on the shaft, rotate the inner sheeve clock wise until the ramps are in line. Should only have ta rotate it about 1/8 - 1/4 turn.

bogeyman · 07-14-2009, 06:54 PM

Ok thanks very much.

07-14-2009, 02:59 PM	#1
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	G16 Secondary clutch Hello, Just wondering if any one could explain if i have to preload the stock spring on the secondary clutch, and if so how do i do this, I had to remove clutch to replace a bearing in rear end,
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

07-14-2009, 03:06 PM	#2
dirtysouth Gone Wild Join Date: Feb 2009 Location: P-COLA Posts: 1,176	Re: G16 Secondary clutch Put the spring in B 4 and as you install it on the shaft, rotate the inner sheeve clock wise until the ramps are in line. Should only have ta rotate it about 1/8 - 1/4 turn.

07-14-2009, 06:54 PM	#3
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76	Re: G16 Secondary clutch Ok thanks very much.
bogeyman Getting Wild Join Date: Jul 2009 Posts: 76

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
yamaha G9 secondary clutch nut removal	Gas Yamaha
Secondary 28 degree clutch	Big Block Talk!
91 g2 secondary clutch spring	Gas Yamaha
Need a secondary clutch	Golf Carts and Parts
what is the best secondary clutch	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum