G1 Build! COPPERHEAD 750cc

bryguy39 · 03-13-2011, 09:45 PM

Here is what im starting out with, took the motor out today along with everything else. This is going to be a 6 seater stretch,with a kz750cc bike motor. Here are the pics to start the project, will take pics as we go.

rokcrlr · 03-14-2011, 06:49 PM

Isnt that an aircooled engine? How do you plan to keep it cool inside the engine compartment. Remember bike engines are designed to have air passing over the fins while trucking down the road. This won't be happening in a cart.

bryguy39 · 03-17-2011, 11:26 PM

This cart will be lifted, we plan on making an air duct from under the cart to cool the engine, should be fine. If not we will run a fan of some sort

Thanks, Bryan

Tonka329 · 03-20-2011, 01:47 PM

Well!? How is it going? got it in yet?

bryguy39 · 03-20-2011, 08:36 PM

It will be alittle while before there will be progress, were i am building it is at my buddy's place and he is like an island once the snow starts melting its like a big flood, so hes busy sand bagging.

Tonka329 · 03-21-2011, 04:35 PM

Sandbaggin'!

bryguy39 · 06-05-2011, 08:42 PM

Things are looking up, just gathering some of the last pieces for the project! Should be up and going here shortly :)

djflizo69 · 06-06-2011, 12:42 PM

Nice! Can't wait to see this thing take shape!!!

bryguy39 · 07-10-2011, 08:32 PM

Well Guys we got a good jump on it this weekend, we are making it a 4 seater and making a custom cooler on the rear! we will be stretching it after its up and running. Here are some pics. I forgot to take a pic of the motor laying on the swing arm,but we ran outta time, we are gunna cut the bike frame so we dont have to make complete motor mounts. Let me know what you all think.

Sandtrap · 07-11-2011, 04:51 PM

Now I can see what your doing. Lots a work huh? Those 4" bilge blowers I used to cool the engine have been working ok now for over 10 years. Your project looks good so far.

03-13-2011, 09:45 PM	#1
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370	G1 Build! COPPERHEAD 750cc Here is what im starting out with, took the motor out today along with everything else. This is going to be a 6 seater stretch,with a kz750cc bike motor. Here are the pics to start the project, will take pics as we go.
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370

03-14-2011, 06:49 PM	#2
rokcrlr Gone Wild Join Date: Sep 2010 Location: Decatur,IL Posts: 553	Re: G1 Build! COPPERHEAD 750cc Isnt that an aircooled engine? How do you plan to keep it cool inside the engine compartment. Remember bike engines are designed to have air passing over the fins while trucking down the road. This won't be happening in a cart.

03-17-2011, 11:26 PM	#3
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370	Re: G1 Build! COPPERHEAD 750cc This cart will be lifted, we plan on making an air duct from under the cart to cool the engine, should be fine. If not we will run a fan of some sort Thanks, Bryan
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370

03-20-2011, 01:47 PM	#4
Tonka329 Smoov az a gravy sammich Join Date: Oct 2008 Location: Limestone, Illinois Posts: 3,462	Re: G1 Build! COPPERHEAD 750cc Well!? How is it going? got it in yet?

03-20-2011, 08:36 PM	#5
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370	Re: G1 Build! COPPERHEAD 750cc It will be alittle while before there will be progress, were i am building it is at my buddy's place and he is like an island once the snow starts melting its like a big flood, so hes busy sand bagging.
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-21-2011, 04:35 PM	#6
Tonka329 Smoov az a gravy sammich Join Date: Oct 2008 Location: Limestone, Illinois Posts: 3,462	Re: G1 Build! COPPERHEAD 750cc Sandbaggin'!

06-05-2011, 08:42 PM	#7
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370	Re: G1 Build! COPPERHEAD 750cc Things are looking up, just gathering some of the last pieces for the project! Should be up and going here shortly :)
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370

06-06-2011, 12:42 PM	#8
djflizo69 Not Yet Wild Join Date: Mar 2010 Location: So.Cal. Posts: 67	Re: G1 Build! COPPERHEAD 750cc Nice! Can't wait to see this thing take shape!!!

07-10-2011, 08:32 PM	#9
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370	Re: G1 Build! COPPERHEAD 750cc Well Guys we got a good jump on it this weekend, we are making it a 4 seater and making a custom cooler on the rear! we will be stretching it after its up and running. Here are some pics. I forgot to take a pic of the motor laying on the swing arm,but we ran outta time, we are gunna cut the bike frame so we dont have to make complete motor mounts. Let me know what you all think.
bryguy39 Gone Wild Join Date: Nov 2008 Posts: 370

07-11-2011, 04:51 PM	#10
Sandtrap Not Yet Wild Join Date: Jul 2011 Location: Lake Havasu, Az. Posts: 2	Re: G1 Build! COPPERHEAD 750cc Now I can see what your doing. Lots a work huh? Those 4" bilge blowers I used to cool the engine have been working ok now for over 10 years. Your project looks good so far.

Similar Threads
Thread	Forum
Front end help for high speed ? 750cc	Design Center
EZGO Build Block Build - CPP kit, Allsports LT	Big Block Talk!
G1 Build! COPPERHEAD 750cc	Members Rides
G 16 build	Members Rides
750cc in a club car	Design Center