07-23-2016, 10:14 AM | #1011 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Need ezgo diagnostics for resistor wiring
You have a X-440. (3-Wheel Marathon)
I don't have a service manual for a 1988 specifically, but here is one for a 1987 and I'm pretty sure the only difference is they went to a one piece differential case in 88 vs the split case used in 87. Also attached is the parts manual for a 1988. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-25-2016, 03:09 PM | #1012 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
,,,,
|
07-27-2016, 04:53 PM | #1013 |
Getting Wild
Join Date: Dec 2012
Posts: 126
|
Re: bad boy bb-ams4 wire diagram
Here is what I have.
--classic is for BBB with two sevcon millipak controllers. --series big & small is for BBB with one controller. hope this helps someone... |
07-27-2016, 04:53 PM | #1014 |
Getting Wild
Join Date: Dec 2012
Posts: 126
|
Re: bad boy bb-ams4 wire diagram
Here is what I have.
--classic is for BBB with two sevcon millipak controllers. --series big & small is for BBB with one controller. hope this helps someone... |
08-03-2016, 04:32 PM | #1015 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: O-I_C
test
|
08-03-2016, 07:57 PM | #1016 |
Gone Wild
Join Date: Jan 2016
Location: Hickory, NC
Posts: 702
|
O-I_C
http://www.buggiesgonewild.com/gas-h...-r-switch.html
I don't know what I did wrong, but I messed something up. All I get is forward. No reverse - whether my toggle switch is in the ON or OFF position. I even disconnected the switch. Forward. Connected the 2 wires together. Forward. Checked continuity of switch and it's working. All of the main wires are 4 gauge, crimped, soldered, and heat shrink tubing added. The red switch wire is 12 gauge, crimped, soldered, and tubed. The red wire on the photo (see below) goes to the toggle switch and then to the gas pedal micro switch on the KEY SWITCH side. I labeled everything else. Any ideas? How can I test with my multimeter to make sure the solenoids are working? Help please! |
08-05-2016, 09:58 AM | #1017 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: RXV Brake Issue
Motor Brake Mounting Hole alignment.pdf
|
08-08-2016, 05:37 PM | #1018 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
|
08-08-2016, 07:04 PM | #1019 | ||
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: ID my cart!!
Ezgo
\ Quote:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EZ GO Manuals!! 89-93 2-cycle gas Owner's/Service Manual & 89-91 Parts Manual http://dl.dropbox.com/u/570501/golfc...al%2089-93.pdf ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Club Car Quote:
|
||