01-28-2023, 09:21 AM | #1 |
Not Yet Wild
Join Date: Nov 2013
Posts: 24
|
Eco Battery Gauge Hole Size
Can't seem to figure out what hole saw size I need to use to mount the LCD on the dash. Can someone help?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-28-2023, 09:24 AM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,167
|
Re: Eco Battery Gauge Hole Size
Instructions say: 3. Use a 2-1/8” or 54mm hole saw to make a hole in the
desired location. I just helped my buddy install an ECO system in his EzGo RXV and the meter fit the old meter hole in the dash exactly. |
01-28-2023, 09:51 AM | #3 |
Not Yet Wild
Join Date: Nov 2013
Posts: 24
|
Re: Eco Battery Gauge Hole Size
|
01-29-2023, 02:17 PM | #4 |
Not Yet Wild
Join Date: Mar 2022
Posts: 33
|
Re: Eco Battery Gauge Hole Size
It’s 2 1/16 if it’s the newer gauge. I just installed a Gen 2.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Quick question on shackle hole size | Electric Club Car | |||
Replacement Battery Cable Gauge Size Recommendation | Electric EZGO | |||
Key switch plate SOC meter hole size | Electric EZGO | |||
RXV OEM SOC METER - What size hole to drill?! | Electric EZGO | |||
what is the diameter of 2 gauge and 4 gauge battery wire? | Electric EZGO |