|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-07-2020, 08:59 AM | #1 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Adding Brake lights and blinkers to existing lights
I installed a RecPro light kit in my 2012 Precedent a few years ago electing to not go with brake lights and blinkers at the time, didn't think I would need them. Now I would like to add them. Will the Madjax blinker and turn signal upgrade kit be a direct fit for the lights I currently have? It currently has the RecPro all led kit with bucket harness.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-07-2020, 09:25 AM | #2 | |
Gone Wild
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
|
Re: Adding Brake lights and blinkers to existing lights
Quote:
If your original kit was non LED, then go for LED kit and upgrade lights at same time Non LED Kit complete $140 https://www.amazon.com/RecPro-PRECED...7350900&sr=8-3 LED Kit complete $199 https://www.amazon.com/RecPro-PRECED...7350930&sr=8-2 IMHO |
|
12-07-2020, 09:37 AM | #3 |
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Adding Brake lights and blinkers to existing lights
Yeah my existing kit is LED.
|
12-07-2020, 12:21 PM | #4 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Adding Brake lights and blinkers to existing lights
Ping, do you know if the OEM brake switch in a '14 Precedent would work in direct replacement for the pressure pad in some of these kits?
|
12-07-2020, 08:08 PM | #5 |
Gone Wild
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
|
Re: Adding Brake lights and blinkers to existing lights
Not sure what was OEM brake light switch in 2014. It may be what I am describing here. I've used this one in the link on a couple of Precedents in place of the squishy pressure pad, where I added light kits. This is still a pressure pad, but it is a direct replacement for existing brake pedal rubber. Plugs right into the harness. Just not a cheap solution.
https://www.ebay.com/itm/Brake-Pad-L...Cclp%3A2334524 |
12-07-2020, 08:13 PM | #6 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Adding Brake lights and blinkers to existing lights
I'm not entirely sure what's there, but there are two wires (red/black) traveling down the pedal arm. I haven't checked them with a continuity tester yet, but i cannot imagine that they're for anything other than a stock pressure pad like the one you linked.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
07 TXT PDS - i want lights, blinkers and brake lights - RECOMMENDATION | Electric EZGO | |||
2010 RXV blinkers and brake lights | Lifted Golf Carts | |||
G3A sun classic Blinkers/brake lights | Gas Yamaha | |||
Installing Blinkers/Brake Lights on Existing LED lights | Electric EZGO | |||
Brake lights & Blinkers | Gas EZGO |