club car motor transplant

[hacksawjoe]

my friend wants to put a counter clockwise motor in his club car and hook up to the original rear can he run the cart in reverse gear to go forward and forward to go backward and any difference in speed or torque thanks from Pa.

[nobuckbuild]

yes you can do it , and yes if its a 96 or newer rear it will run reverse as forward and visa versa , the problem with this will be top speed in forward will be reduced but torque will increase , so hills will be easier but top speed will be 12-15 mph and reverse top speed will be closer to 20-23 mph which can be dangerous , you can also get high speed gears to correct the problem but then the reverse problems get crazy like 40 mph top speed in reverse.

where you at in pa?

[hacksawjoe]

Lock Haven Pa. 17750 email billua@centurylink.net would like to hear from other in Pa or close by thanks

[nobuckbuild]

im right over in elysburg by knoebels

[hacksawjoe]

I think this cart is an 88 id have to look at the tag but it does have forward and rev on rear end he rigged up a lift and ive been working on fixing things up he had the steering on the front of the cart and when you turned the wheel to the right the wheels turned left making new mount for steering so it will turn the right way we have two lifted ezgo and one lifted Yamaha a g22 I like to tinker with them like to take them on the mountain trails better

[hacksawjoe]

also looking for a ds front cowl for it

[nobuckbuild]

i had stopped at the dcnr out the other end of renovo and checked in and im looking forward to getting my atv plate , they are suppose to have kettle run open this spring along with bloody skillet. i have a whole fleet of carts so its going to be fun, do you have a place to ride up your way the we dont need plates?

[hacksawjoe]

My buddy has 3500 acres with trails you can drive a truck on has it all gated with locks on we ride there when we can but I don't take advantage of him hes a good friend and I want to keep it that way we don't go there unless hes there. ill ask him when I see him and see if I can invite you over some day thanks don't want to post location of camp location because people might do something if they knew

[Springbok]

Originally Posted by hacksawjoe

I think this cart is an 88

If the cart is an '88 then you have nothing to worry about with the motor rotation. From 1984 up to 1996 these carts came stock with counter-clockwise-rotating motors. It's the newer ones (1997-up) that are difficult to deal with because they came with clockwise motors.

[nobuckbuild]

i had read that wrong evidentally it should be no problem i thought he was dealing with a late model engine