|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
09-16-2020, 08:04 PM | #1 |
Not Yet Wild
Join Date: May 2017
Posts: 10
|
96 Ezgo home made lift help.
Hi guys been lurking for a while first time posting.
Well to make a very long story short Daughter #1 had a bad equestrian accident, was crushed and shattered her pelvis. So she could really use my buggie to get around. So did what every good dad would and handed it over and dug out my old dilapidated 96 ezgo Txt to build another one for me. The problem is now I find out there is a nation wide shortage of EVERYTHING! So I am building/modifying My own lift Kit for the 96. Going to modify the front similar to the jakes Drop axil lift. Can anyone with a lifted 94 to 2000 ezgo, give me a spindle to spindle measurement across the bottom? My 2004 is about 29 inches across the front. (about 3 inches or so wider then the 96) Thanks in advance, Mike |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Home made lift | Electric Club Car | |||
G8 - Home made lift kit | Gas Yamaha | |||
Home made Z lift for CC DS | Lifted Golf Carts | |||
gas CC home made lift | Design Center | |||
Home made lift kit?? | Lifted Golf Carts |