|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-15-2017, 09:21 AM | #1 |
Gone Wild
Join Date: Aug 2016
Location: SE Florida
Posts: 224
|
Alltrax SR48500 Settings
Just making sure my settings are correct. My buddy has same set up stock controller and he is pulling away from me. Both CC DS 48v with PQ Bandit motors.
Here are my settings: KSI ON VOLTAGE 16.0 volts Under voltage 32.0 volts Over voltage 62.0 Digital switch is checked Fn1 not checked Max motor amps 500 Max battery amps 500 Max forward 100% Max reverse 50% Throttle rate 12.5% Under throttle settings Set to club car High pedal disable is checked Curve is set to standard which looks good to me Thanks Bobby |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2017, 09:37 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax SR48500 Settings
For the SR control there is nothing beyond 100% amps and speed. You can set the throttle rate slightly higher to accelerate quicker but top end is determined by the cart not the SR controller.
Bottom line is no two carts are really the same. |
07-15-2017, 09:45 AM | #3 |
Gone Wild
Join Date: Aug 2016
Location: SE Florida
Posts: 224
|
Re: Alltrax SR48500 Settings
Thanks Scotty!!!! Very much I feel like reverse is a little faster. I'm double checking my connections
|
07-15-2017, 10:16 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax SR48500 Settings
Check for brake drag - the cart should roll easily when in neutral and tire pressure makes a big difference in top speed. Ultimately you guys could have different motors.
|
07-15-2017, 10:28 AM | #5 |
Not Yet Wild
Join Date: Jun 2017
Location: Tucson, AZ
Posts: 43
|
Re: Alltrax SR48500 Settings
Your buddy may be getting more amps to his motor than you are. Wire gauges, wire conditions, connections etc can make a difference!
|
07-15-2017, 11:10 AM | #6 |
Gone Wild
Join Date: Aug 2016
Location: SE Florida
Posts: 224
|
Re: Alltrax SR48500 Settings
If I took a pic of his wires and posted it you would prob call the fire dept. all stock and we just found Detroit and bare wires.
I just was messing around with the controller and when I changed the max forward % that worked on both forward and reverse but when I changed the reverse % it did nothing to the reverse. Could I have something hooked up wrong? |
07-15-2017, 11:10 AM | #7 |
Gone Wild
Join Date: Aug 2016
Location: SE Florida
Posts: 224
|
Re: Alltrax SR48500 Settings
Sorry dry rot not Detroit,.....stupid spell check
|
07-08-2018, 08:35 PM | #8 | |
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Alltrax SR48500 Settings
Quote:
did you ever figure this out, i may be having the same issue right now with my sr48500 |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR48500 throttle percentage issue | Electric Club Car | |||
Alltrax SR48500 Detune to 300? | Electric EZGO | |||
SR48500 Alltrax introduction thread | Announcements | |||
Wiring Alltrax SR48500 to 2000 EZGo | Electric EZGO | |||
Alltrax settings | Extreme DC! |