|
|
|||||||
| Garage and Workshop Tips & Ideas for the garage or workshop. |
  |
|
|
Thread Tools | Display Modes |
11-09-2013, 05:32 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 57
|
Loose tire help
I have a lifted cart and am getting wobble on the passenger side tire. I jacked my front end up and was able to shake the whole rim and noticed a lot of play inside the spindle sleeve. I cannot locate another spindle to replace it. I attached photos for assistance.
Who makes this and where can I get. Do I have to replace the whole spindle or are their inners I can purchase to tighten it up? thanks in advance |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-09-2013, 05:43 PM
|
#2 |
|
Getting Wild
Join Date: Jun 2013
Location: N.E. Michigan
Posts: 126
|
Re: Loose tire help
When you jack up the cart so the tire is off the ground is the play in the area I marked Blue or in the Red?
|
|
|
|
|
11-09-2013, 06:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 57
|
Re: Loose tire help
the play is inside the blue arrow
Green goes inside the red and blue arrow |
|
|
|
|
11-12-2013, 10:10 AM
|
#4 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Loose tire help
That picture shows the spindal moving up and down which isn't correct is it.
I've never seen one work like that. Correct me if I'm wrong.    |
|
|
|
|
11-12-2013, 03:31 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2010
Location: Port Wentworth, GA
Posts: 247
|
Re: Loose tire help
Do you have a pic of the other side for a comparison? That spindle setup doesn't look correct. Is that a homemade kit or aftermarket? Looks like there should be some type of retainer or lock nut at the top to keep everything in place. Like Andy said, it should not be moving vertically.
|
|
|
|
|
11-12-2013, 03:50 PM
|
#6 |
|
Not here yet
Join Date: Sep 2013
Location: jupiter florida
Posts: 504
|
Re: Loose tire help
It seems to me that all you would have to do is take it apart and bring the brass bushings to a tractor supply store to match them up. The spindle does look homemade so hopefully it has bushings. It looks like a long bolt and a spacer to me.
|
|
|
|
|
11-12-2013, 07:37 PM
|
#7 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 57
|
Re: Loose tire help
just found out the the lift kit is made by Strech Plastics long travel lift. no longer made. and the play is not vertical it is loose side to side inside of blue arrow. I will take pic of other side and try to put video of me moving wheel while in the air
|
|
|
|
|
11-12-2013, 08:20 PM
|
#8 | |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Loose tire help
Quote:
|
|
|
|
|
|
11-12-2013, 08:23 PM
|
#9 |
|
Smoov az a gravy sammich
 Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: Loose tire help
Looks like a Strech kit. May want to call them and see if they have any parts on the shelf for your cart...
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Best tire/tire size for 4" lift? | Electric EZGO | |||
| Steering loose again | Electric EZGO | |||
| loose front end & uneven tire wear | Electric EZGO | |||
| belt is loose | Gas Yamaha | |||
| lift/tire combo question (mostly tire) | Gas Club Car | |||
Linear Mode
