03-24-2012, 01:08 PM | #1 |
Not Yet Wild
Join Date: Mar 2012
Posts: 65
|
Body Repair
Has anyone used FAS-WELD plastic repair epoxy putty for repairs? I need to patch 6 small holes before painting.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-24-2012, 01:47 PM | #2 |
Getting Wild
Join Date: Sep 2010
Location: NE KS
Posts: 111
|
Re: Body Repair
No don't know about that material, but make sure you counter sink the hole at least 1/8" - grind the metal first then countersink with a tapered punch and a hammer. Body filler would probably work fine unless it is a high stress area or water prone.
|
03-24-2012, 01:55 PM | #3 |
Not Yet Wild
Join Date: Mar 2012
Posts: 65
|
Re: Body Repair
Body filler? Is their s certain brand? These are tiny holes up in the front (by the club car sticker) where the previous owner put the lights. I want to install the light kit for the Precedent.
|
03-24-2012, 07:26 PM | #4 |
Getting Wild
Join Date: Sep 2010
Location: NE KS
Posts: 111
|
Re: Body Repair
The epoxie you have should probably work as well - just harder to sand flat- start off with 80 grit - go down to 150 then primer / sand/ reprimer/ paint. good luck. ~ Mike
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Body Repair | Electric EZGO | |||
Club car body Repair | Gas Club Car | |||
green body or camo dipped body | Electric Club Car | |||
Body Repair Question | Body and Paint | |||
Body repair | Gas Club Car |