lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Bike & ATV Engine Swaps


Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-11-2010, 07:13 AM   #1
MACSBOOST
Not Yet Wild
 
Join Date: Apr 2010
Posts: 58
Default Yet another GSXR powered cart

I decided to use a little 600 engine. lol I'm still assembling, but i am using a jack shaft and a CVTech clutch. check out the pictures and the youtube video!
http://www.facebook.com/album.php?ai...30&id=12710422


I'll be adding some custom disc brakes to the front soon.

To make it driveable, I plan on building a drive by wire system that can intelligently operate the throttle, and operate it such that it can have a mode that is similar to stock power levels. If the clutch drags too much, I'll probably add a solenoid that automatically engages the clutch for the first few percent of pedal travel, then start to add throttle angle.
MACSBOOST is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-11-2010, 07:28 AM   #2
fritster
Gone Wild
 
fritster's Avatar
E-Z-GO
 
Join Date: Apr 2010
Location: God's country.. Luziana
Posts: 274
Default Re: Yet another GSXR powered cart

NICE,
I have same engine. Need help figuring out the final drive. What type of axle are you running, the stock one? I may need to call you and talk. I have an ezgo electric and need to know what type of axle to put under mine to make this work and keep a reverse and have a good and workable setup as well.
my email addy is mrmrsrsm@yahoo.com
fritster is offline   Reply With Quote
Old 04-11-2010, 09:39 AM   #3
MACSBOOST
Not Yet Wild
 
Join Date: Apr 2010
Posts: 58
Default Re: Yet another GSXR powered cart

stock g2 axle. This has fwd/rev gears. I am using a G1 belt to keep the clutch closer to the axle. its tight in there.
MACSBOOST is offline   Reply With Quote
Old 04-11-2010, 10:07 AM   #4
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,752
Default Re: Yet another GSXR powered cart

Nice job I'm in the process of getting the peices for my bike engine build. Yamaha fz6 600 efi. Have a narrowed Ford 9" (out of a TaylorDunn). Plans are mount engine sideways and use a drive shaft. The 3.00 gears should make it haul. My only problem with the stock Yamaha rear end is the 12:1 gear ratio. How fast do you think you'll go? I even bought a fabbed rear gear years ago that slides over the input shaft for a chain straight from the engine. Maybe I should sell it. Might help someone's bike build. Thanks for posting, keep up the nice work. Dave
Attached Images
File Type: jpg 2009_12190001.jpg (84.6 KB, 33 views)
File Type: jpg 2009_12190004.jpg (77.4 KB, 23 views)
smallblock450sl is offline   Reply With Quote
Old 04-11-2010, 10:19 AM   #5
MACSBOOST
Not Yet Wild
 
Join Date: Apr 2010
Posts: 58
Default Re: Yet another GSXR powered cart

6th gear is 1.2:1 on the GSXR
Redline is 16Krpm
redline at the engine sprocket is 13,500

My jack shaft is 1:1, 16 tooth to 16 tooth.

If stock is 20mph at 3K, then it will be a whole lot faster than stock! (I'm guessing at both numbers, I have no idea, but It will be in the ball park. The plan is to use the gearbox to fine tune the range in the end.

I dont want it going too crazy fast, well, its too late for that!
MACSBOOST is offline   Reply With Quote
Old 04-11-2010, 10:50 AM   #6
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,752
Default Re: Yet another GSXR powered cart

Quote:
Originally Posted by MACSBOOST View Post
6th gear is 1.2:1 on the GSXR
Redline is 16Krpm
redline at the engine sprocket is 13,500

My jack shaft is 1:1, 16 tooth to 16 tooth.

If stock is 20mph at 3K, then it will be a whole lot faster than stock! (I'm guessing at both numbers, I have no idea, but It will be in the ball park. The plan is to use the gearbox to fine tune the range in the end.

I dont want it going too crazy fast, well, its too late for that!
I agree, your jack shaft at 1 to 1 was the way to go. I'll keep watching, can I steal some of your ideas?
smallblock450sl is offline   Reply With Quote
Old 04-13-2010, 06:42 PM   #7
richie
ZZGONE
 
richie's Avatar
E-Z-GO
 
Join Date: May 2008
Location: central florida
Posts: 656
Default Re: Yet another GSXR powered cart

Very interesting setup.Looks great.I still say we need a section just for bike motor builds............
richie is offline   Reply With Quote
Old 04-13-2010, 09:32 PM   #8
CRAZYTasty
Getting Wild
 
CRAZYTasty's Avatar
 
Join Date: Dec 2007
Location: nj
Posts: 76
Default Re: Yet another GSXR powered cart

Looks good.
Keep the vids coming.
CRAZYTasty is offline   Reply With Quote
Old 04-14-2010, 03:15 PM   #9
MACSBOOST
Not Yet Wild
 
Join Date: Apr 2010
Posts: 58
Default Re: Yet another GSXR powered cart

I need to retune the clutch to shift at 3500-4K. That would give me about 40-50hp to the wheels during the shift.
MACSBOOST is offline   Reply With Quote
Old 04-16-2010, 08:37 PM   #10
MACSBOOST
Not Yet Wild
 
Join Date: Apr 2010
Posts: 58
Default Re: Yet another GSXR powered cart

got it all in and drove it around the parking lot.. its LOUD! Sounds like an indy car with no exhaust.
Something is not right with the gear ratio or the clutch. It doesnt want to engage until 5000 RPM on the tach while in sixth gear. I was expecting this to be closer to 2k. Maybe its sticking?

I didnt drive it much and it was getting late. I'll test more tomorrow.
MACSBOOST is offline   Reply With Quote
Reply

Tags
2007 gsxr 600 g2
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk! > Bike & ATV Engine Swaps


Thread Tools
Display Modes


Similar Threads
Thread Forum
jet powered golf cart! Videos
I gotta get one of these! A V8 powered bar stool cart! Design Center
Cart is powered unless in neutral Electric EZGO
turbine powered golf cart? Big Block Talk!


All times are GMT -5. The time now is 03:35 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.