|
10-14-2018, 06:59 PM
|
#1 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
painting a hot rod frame
I'm building a 29 ford PU hot rod. I'm building a frame for it. I have brand new raw steel frame rails that are OILED down so they won't rust. What should I use to clean the oil off the frame rails raw steel, to get ready to prime. And what kind of primer should I use on the raw steel. I'm going to paint the frame gloss black. What primer and paint should I use for a show/mirror finish. The thing I'm worried about is the oil on the frame causing a problem
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-15-2018, 04:29 AM
|
#2 |
|
Gone Wild
Join Date: May 2013
Location: Pendelton NY ( F cuomo)
Posts: 923
|
Re: painting a hot rod frame
we build industrial machines here and we deal with oiled steel all the time we use "Simply green" and pressure wash before we prime. You want a good Zinc primer or better yet a 2 part epoxy primer is good too
|
|
|
|
|
10-17-2018, 07:04 AM
|
#3 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: painting a hot rod frame
Thank you
I used a scotch pad and some spray degreaser and the frame cleaned up great. And I have some Zinc primer at the shop. That's what I'm going to use  |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Frame Painting/Coating | Electric EZGO | |||
| Painting the Top | Electric EZGO | |||
| Painting my ez go | Body and Paint | |||
| Painting and prepping Chassis/Frame ezgo txt | Body and Paint | |||
| Painting the frame | Gas EZGO | |||
Linear Mode
