Carts Parts Plus: Oversize Jets/Performance Parts

spriddle · 01-08-2007, 08:51 PM

Quote:

Originally Posted by fastjim11

Or you can have tom send one of each , they don't cost that much.

This is what I'm thinking.

spriddle · 01-08-2007, 08:52 PM

Quote:

Originally Posted by TVH

Just a quick thought about jets. Don't drill too big!

I confess...Yup been there done that. They like to run closer to the lean side, not fat. There comes a point where I just have to leave crap the heck alone!

Then I call Buggies Unlimited and they said "can't buy just jets, Gotta buy the WHOLE carb" Guess even they are not right all the time.

Nice to come to this forum for an unbiased opinion.

Oh, we're biased here all right. If your not laughing and having a good time, you have to sit in the shoutbox for 30 min's.

:)

fastjim11 · 01-08-2007, 10:19 PM

Well if you drill to big you can alwaysa solder it up and start over. But 3/64 is the magic number .046 for G-9 no matter which carb you have.
I tried drilling up to it overshot once bougt more jets yada yada yada you know the story.

TheNewGuy · 01-09-2007, 05:52 AM

When I had the stock engine I tried 4 different sizes of larger main jet. From
.044 to .050, Jim is right .046 is the size you want.

fastjim11 · 01-09-2007, 07:46 AM

The carbs are Mikuni and the jets can be found online if you can identify you carb. Just Goggle 'Mikuni".

TVH · 01-09-2007, 05:56 PM

Fastjim are these carbs for ezgo or yamy?

TheNewGuy · 01-09-2007, 06:59 PM

Quote:

Originally Posted by TVH

Fastjim are these carbs for ezgo or yamy?

I know yamaha Mikuni carbs. Not sure what ez-go uses. Tom at
cartpartsplus has carb jet kits for cc, ez-go and Yamaha.

NO NO NO E-Z-GO! · 01-09-2007, 07:47 PM

Club Car uses Kei-Hin carbuertors. Some may use Mikunis though.

fastjim11 · 01-09-2007, 10:41 PM

Sorry, the jets and sizes I'm speaking of are for yamaha G-9.
Mikuni carbs are on the Yamaha I don't know about the rest.

01-08-2007, 10:19 PM	#13
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381	Well if you drill to big you can alwaysa solder it up and start over. But 3/64 is the magic number .046 for G-9 no matter which carb you have. I tried drilling up to it overshot once bougt more jets yada yada yada you know the story.
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381

01-09-2007, 05:52 AM	#14
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 16,544	When I had the stock engine I tried 4 different sizes of larger main jet. From .044 to .050, Jim is right .046 is the size you want.
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

01-09-2007, 07:46 AM	#15
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381	The carbs are Mikuni and the jets can be found online if you can identify you carb. Just Goggle 'Mikuni".
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381

01-09-2007, 07:47 PM	#18
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	Club Car uses Kei-Hin carbuertors. Some may use Mikunis though. Last edited by NO NO NO E-Z-GO!; 07-10-2007 at 09:41 AM..

01-09-2007, 10:41 PM	#19
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381	Sorry, the jets and sizes I'm speaking of are for yamaha G-9. Mikuni carbs are on the Yamaha I don't know about the rest.
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-09-2007, 05:56 PM	#16
TVH Getting Wild Join Date: Jan 2007 Location: W Michigan Posts: 94	Fastjim are these carbs for ezgo or yamy?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode