02-11-2007, 11:27 AM | #11 |
Guest
Posts: n/a
|
VERY NICE!!!!...AWESOME!!!...And you got the pics right too!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-11-2007, 11:45 AM | #12 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
I forgot yours is an 05. EZGO changed the steering in 2001.5. Cart is looking good hope you are able to figure out the toe problem.
|
02-11-2007, 11:58 AM | #13 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Al your cart looks good!!! It sure does appear that you do need a shorter
tie rod. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-11-2007, 12:11 PM | #14 |
Not Yet Wild
Join Date: Feb 2007
Location: Alabama
Posts: 36
|
I'm thinking that this front lift is the same as what is used on an ST 350 (NEWER STYLE?)....the rear is different for the workhorse(MPT) so I should be able to get the tie rod for a newer style steering box on a ST and solve my problem.......I'm grasping at straws here....
thanks again for the replies so far..... AL also, I was told elswhere that a shorter tie rod will affect the turning radius...???....that can be adjusted on the steering link (rack) couldn't it? |
02-11-2007, 12:15 PM | #15 |
Guest
Posts: n/a
|
Big Al...do you own a know anyone who owns a welder?
|
02-11-2007, 12:18 PM | #16 | |
Not Yet Wild
Join Date: Feb 2007
Location: Alabama
Posts: 36
|
Quote:
sure do........... |
|
02-11-2007, 12:28 PM | #17 | ||
Guest
Posts: n/a
|
Quote:
|
||
02-11-2007, 12:36 PM | #18 | |||
Not Yet Wild
Join Date: Feb 2007
Location: Alabama
Posts: 36
|
Quote:
|
|||
02-11-2007, 12:38 PM | #19 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Could you get a metal rod the length you need and tap each end for the tie rods, so if you ever decide to put it back you can?
|
02-11-2007, 08:41 PM | #20 |
Not Yet Wild
Join Date: Feb 2007
Location: Alabama
Posts: 36
|
well heres pics of the pigeon toed beast.
night shots..I'll get better ones later I think I'll cut it and weld it back together later this week. BTW I measured the stock axel =30" wide...and the jakes =28" wide...looked ok after all was said and done..I Thought I was gonna need spacers in the rear to even it out ....guess not unless I put'em all the way around Thanks for all your help!!!!!! AL |