12v reducer constant power to accessories

[cobra86d]

I just wired up my 12v reducer from carts unlimited w/ the green wire wired to the 36v coming out of the switch. With the key (2-position) off I am still getting power to my lights and light bar and I can't figure out why. When I check the volts with the key off it's still getting around 4 volts and I'm not sure why. Do I need a new key switch or a 3-position?

[scottyb]

This reducer has a low voltage wire for the radio presets. This output is on the blue wire.

[cobra86d]

Originally Posted by scottyb

This reducer has a low voltage wire for the radio presets. This output is on the blue wire.

Yes it does. Sorry I was talking about the 2-position key output to the green wire. It won't turn off the power to the reducer with the key off, but if I turn the tow/ run switch to tow (turns off reducer) and then cycle it back to run the reducer stays off. But if I turn the key (reducer turns on) and then turn off the key the reducer stays on and doesn't shut off

(posted in wrong section sorry)

[cobra86d]

Just double checked the fuse panel still receives 12v with the key off. Am I missing something?

[scottyb]

We figured out that the reducer was always on, not switched.