lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-14-2010, 09:11 AM   #1
rxp-rider
Gone Wild
 
rxp-rider's Avatar
E-Z-GO
 
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
Default 400 or 500 amp?

WITHIN THE NEXT FEW MONTHS I AM SENDING MY MOTOR TO PQ. I AM SLOWLY GETTING THE PARTS I NEED(HIDING THE EXPENSE FROM THE LADY) . WONDERING IF I SHOULD GET A 400 OR 500AMP. CONTROLLER? WOULD I GET MORE OUT OF THE 500AMP. OR WILL A 400AMP. BE ENOUGH?
rxp-rider is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-14-2010, 09:14 AM   #2
huntinghawk
Gone Wild
 
huntinghawk's Avatar
 
Join Date: Jan 2010
Location: NC Florida
Posts: 348
Default Re: 400 or 500 amp?

Depends on what you are having done to the motor. PQ might best answer your question.

Ross
huntinghawk is offline   Reply With Quote
Old 08-14-2010, 09:18 AM   #3
rxp-rider
Gone Wild
 
rxp-rider's Avatar
E-Z-GO
 
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
Default Re: 400 or 500 amp?

I WANT TO GET MORE SPEED OUT OF THE MOTOR. SO I FIGURE THAT A HIGHER AMP. CONTROLLER WOULD TAKE CARE OF THE TORQUE. I WILL BE RUNNING 36V. FOR NOW BUT I WILL MORE THEN LIKELY GO TO 48V IN THE FUTURE. THINKING THAT I WILL ONLY HAVE TO CHANGE THE SOLENOID AND CHARGER THEN.
rxp-rider is offline   Reply With Quote
Old 08-14-2010, 10:29 AM   #4
huntinghawk
Gone Wild
 
huntinghawk's Avatar
 
Join Date: Jan 2010
Location: NC Florida
Posts: 348
Default Re: 400 or 500 amp?

I suggest converting to 48v first to see what that gives you. More voltage to the motor gives more speed. More amperage to the the motor gives you more torque. So 400 vs 500 really isn't going to give you more speed.

Ross
huntinghawk is offline   Reply With Quote
Old 08-14-2010, 10:50 AM   #5
rxp-rider
Gone Wild
 
rxp-rider's Avatar
E-Z-GO
 
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
Default Re: 400 or 500 amp?

I WILL HAVE THE MOTOR BUILT FOR SPEED,I FIGURED THAT THE CONTROLLER WOULD TAKE CARE OF THE TORQUE. FLORIDA DOES NOT HAVE THE HILLS LIKE I REMEMBER IN THE NORTHEAST
rxp-rider is offline   Reply With Quote
Old 08-14-2010, 10:53 AM   #6
huntinghawk
Gone Wild
 
huntinghawk's Avatar
 
Join Date: Jan 2010
Location: NC Florida
Posts: 348
Default Re: 400 or 500 amp?

Sorry, but I live on a hill in the center of the state. 147ft above sea level. I need toque to get up the hill to my place.

400amp will get you up to speed then voltage & motor as well as tall tires will take care of the speed.

Ross
huntinghawk is offline   Reply With Quote
Old 08-14-2010, 11:45 AM   #7
dougmcp
Gone Wild
 
dougmcp's Avatar
 
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
Default Re: 400 or 500 amp?

Quote:
Originally Posted by huntinghawk View Post
I suggest converting to 48v first to see what that gives you. More voltage to the motor gives more speed. More amperage to the the motor gives you more torque. So 400 vs 500 really isn't going to give you more speed.

Ross
I agree with Ross. If you do the 48v conversion now you may not even need a motor rewind. Your gain will be about 30% in both speed and torque.
IMO 400 amp and a 4ga cable upgrade is plenty to run around the streets with.
dougmcp is offline   Reply With Quote
Old 08-14-2010, 02:27 PM   #8
rxp-rider
Gone Wild
 
rxp-rider's Avatar
E-Z-GO
 
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
Default Re: 400 or 500 amp?

I am not ready to do the 48v conversion yet,i just put new batteries in and i really don't want to put two in the bag well.i figured i would do the solenoid and f&r switch first then the motor then the controller. Wouldn't i get better speed having my motor redone then going to 48v rather then run 48v to my 8 yr. Old motor anyway?
rxp-rider is offline   Reply With Quote
Old 08-14-2010, 02:39 PM   #9
rabbitreborn
Gone Wild
 
rabbitreborn's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
Default Re: 400 or 500 amp?

8 years isn't that old in terms of electric motors. I would do the 48V conversion with a 400 AMP controller first, then if you feel you really need the motor after that, send it out. Unfortunately, your only options for the 48V is either changing out the batteries to 8 volt or adding the extra 2 in the bagwell.
rabbitreborn is offline   Reply With Quote
Old 08-14-2010, 05:12 PM   #10
rxp-rider
Gone Wild
 
rxp-rider's Avatar
E-Z-GO
 
Join Date: Mar 2010
Location: CLEARWATER,FL.
Posts: 555
Default Re: 400 or 500 amp?

Will the 400 amp. Controller be enough for the 48v.?(when i do go to 48v.) how much would i gain with the 500amp. Over the 400 amp.? Sorry for all the questions but i just want to get all the info. Before i jump in and spend the money.
rxp-rider is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes



All times are GMT -5. The time now is 11:27 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.