|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-22-2018, 03:33 PM | #1 |
Gone Wild
Join Date: Jan 2012
Location: Chico, California
Posts: 496
|
Mode Lock 3 not working
Hello, The cart in question is a 2004 Club Car Precedent (4 12v bats)
just installed xct 500 amp controller and an Admiral A4 motor. Everything is working as it should, except the Mode Lock 3 switch. My RPM is limited to around 2500 in all three settings. So it looks like the controller is in the Normal default mode. I have made no changes to the controller settings from the way it came. Checked the settings and they look good to me. Program select is in Dual switch the three user settings all programed. The only thing I have seen that seems odd is on the toolkit monitor screen the user 3 input stays checked even when user 1 or user 2 is selected. Is that how it should be or could this be causing the controller to stay in default mode? Any ideas? |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mode lock 3 ML3 suggested settings | Electric EZGO | |||
My Trail Hog just stopped working, and then started working again. | Electric EZGO | |||
Brake pedal lock not working | Electric EZGO | |||
ST 4x4 Diff lock not working | Gas EZGO | |||
Battery Charger Not Working - Cart Not Working | Electric EZGO |