08-01-2013, 01:00 PM | #1 |
Gone Wild
Join Date: Jun 2012
Location: Las Vegas, NV
Posts: 961
|
EZGO Clone Cradles are FINALLY HERE!!!
http://vegascarts.com/webstore/index...index&cPath=68
Our Big Block Conversion Cradle and Motor Plate setup is FULLY ADJUSTABLE for belt tension and side-side clutch adjustment. This cradle is compatible with all Honda GX340/GX390s and GX420/GX440 Clones. Our cradles are the ultimate heavy duty and made from 1.250" .095" Wall Steel Tubing. The Adjustable CNC Motor Plates are removable and can be swapped out for a different plate if the user ever decides to change engines in the future...Saving you time and money! Motor plates for V-Twins and Small Diesels will be available shortly. Our cradle also features an axle anti-wrap bracket to keep the rear axle from moving under load. Perhaps the largest benefit to our cradles is the adjustable front mount, this front mount has 4 mounting holes which allow the user to change the operating angle of the cradle and make it suitable for stock height golf carts all the way to 6" lifted carts. For those of you who have a lift over 6" on your cart, give us a call and we can make you a custom extra long mount! -Fully Adjustable CNC Motor Plate with Clearance for Oil Drain -Adjustable Heim Joint Front Mount for use with all ride heights -Heavy Duty Axle Anti-Wrap Bracket -All Hardware Included -Made from 1.250" x .095" Wall Tubing and Oversize Hardware -Compatible with all types of engines by swapping out the motor plate -1 Year Defect Warranty Works great with our Starter/Gen Adapter Kit for those who want to retain the stock starting & charging system! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-01-2013, 04:52 PM | #2 |
Gone Wild
Join Date: Jun 2012
Location: Callahan,Florida
Posts: 337
|
Re: EZGO Clone Cradles are FINALLY HERE!!!
Can't wait for mine to get here! I will post pics before and after I get it installed.
|
08-01-2013, 05:13 PM | #3 |
Gone Wild
Join Date: Jun 2012
Location: Las Vegas, NV
Posts: 961
|
Re: EZGO Clone Cradles are FINALLY HERE!!!
Sounds good! Yours just shipped!
|
08-01-2013, 05:54 PM | #4 |
Not Yet Wild
Join Date: Mar 2012
Location: oregon
Posts: 68
|
Re: EZGO Clone Cradles are FINALLY HERE!!!
Do you have them for club car? If not are you and when?
|
08-01-2013, 06:04 PM | #5 |
Gone Wild
Join Date: Jun 2012
Location: Las Vegas, NV
Posts: 961
|
Re: EZGO Clone Cradles are FINALLY HERE!!!
hamy,
Club Car kits are scheduled to be released first thing next week....just waiting on pictures :) They are $99 for the Adjustable Engine Mount. |
08-01-2013, 10:33 PM | #6 |
Gone Wild
Join Date: Oct 2011
Location: Cowtown Texas
Posts: 180
|
Re: EZGO Clone Cradles are FINALLY HERE!!!
Sent it out today Geoff! Now just need to heat to subside when it all shows up to work on it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Gas Engine Cradles | Clone Engine Swaps | |||
clone in a ezgo 1982? | Clone Engine Swaps | |||
My EZGO project finally finished....maybe | Lifted Golf Carts | |||
EZGO to 16hp Clone & More | Big Block Talk! | |||
Finally Finished 13hp Clone | Gas Club Car |