EZGO Clone Swap Kits.....Sneak Peak

geoffw · 04-27-2013, 10:05 AM

We are almost there! The cradles mount directly to the stock front mount so you can keep your starter/gen and you dont have to mess with the stock wiring.

-The actual motor mount is a CNC Laser Cut piece that is fully adjustable both forward-backward for belt tension and side to side for those of you running aftermarket clutches.

-The only fabrication work required is some minor cutting to clearance the engine.

-We retain the stock starter/gen belt and use a slightly longer drive belt.

-The engine sits well below the seat so it can be installed in a stock height cart or a lifted cart without issue.

04-27-2013, 10:05 AM	#1
geoffw Gone Wild Join Date: Jun 2012 Location: Las Vegas, NV Posts: 961	EZGO Clone Swap Kits.....Sneak Peak We are almost there! The cradles mount directly to the stock front mount so you can keep your starter/gen and you dont have to mess with the stock wiring. -The actual motor mount is a CNC Laser Cut piece that is fully adjustable both forward-backward for belt tension and side to side for those of you running aftermarket clutches. -The only fabrication work required is some minor cutting to clearance the engine. -We retain the stock starter/gen belt and use a slightly longer drive belt. -The engine sits well below the seat so it can be installed in a stock height cart or a lifted cart without issue.

Similar Threads
Thread	Forum
GX440 Sneak Peak!	Clone Engine Swaps
EZGO 36 Volt HD 400 amp Cont. 1,000 Amp Peak Solenoid	Golf Carts and Parts
Another Clone Swap	Clone Engine Swaps
2010 EZGO Valor - Sneak Peak from MMT!	Gas EZGO
plowmans new rotary engine. sneak peak	Gas Yamaha