|
04-08-2009, 04:29 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Location: Drexel Hill PA
Posts: 9
|
Any tips on painting the raw plastic roof?
Looking for help with painting the raw plastic roof on my yamaha. I was thinking about using the Rhino spray in bed liner, however want a better look. Does anyone know if a primer than normal paint would bite. Any help would be appreciated!! I had the cart done professionally and didn't have intentions on putting the roof back on, plans changed!
|
04-08-2009, 04:35 PM | #2 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Any tips on painting the raw plastic roof?
Professional bedliner coatings are going to be your best option that will "stick". Most any and all paint will peel off.
|
|
|
04-20-2009, 10:43 AM | #3 |
Not Yet Wild
Join Date: Apr 2009
Location: Texas
Posts: 17
|
Re: Any tips on painting the raw plastic roof?
Do they make this in other colors besides black? Im probably looking in the wrong place, but all I seen at walmart was black. Where else can you get this and in different colors?
|
04-20-2009, 11:09 AM | #4 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Any tips on painting the raw plastic roof?
|
04-08-2009, 08:01 PM | #5 |
Gone Wild
Join Date: Mar 2009
Location: VA
Posts: 382
|
Re: Any tips on painting the raw plastic roof?
I would use Self-Etching primer and then a paint with a flex agent in it. I have been researching this myself. Good luck
|
04-08-2009, 08:32 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Any tips on painting the raw plastic roof?
Hellooo! Krylon Fusion paint for Plastic! http://www.krylon.com/products/fusion_for_plastic/ It etches it's way into the plastic they make a primer too......Been using it for years over here Doesn't peel like reg spray paint
|
04-09-2009, 08:15 AM | #7 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: Any tips on painting the raw plastic roof?
Fusion bonds very well.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-09-2009, 09:05 AM | #8 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,826
|
Re: Any tips on painting the raw plastic roof?
I agree with using Fusion. I had a G16, the only prep I did was wash the plastic body and then just used Fusion paint. No primer, sanding, or anything. Turned out really well to my surprise and held up great. Fusion works better on tops than any paint I've tried as well.
|
|
|
04-15-2009, 07:53 PM | #9 |
Not Yet Wild
Join Date: Mar 2009
Location: Drexel Hill PA
Posts: 9
|
Re: Any tips on painting the raw plastic roof?
Thanks everyone, gonna go with the Fusion paint, after looking into it.
|
04-19-2009, 12:17 AM | #10 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: Any tips on painting the raw plastic roof?
What should I do for my G1? The front end is plastic and the rear is fiberglass and I want to use the same color for both but cannot find any fusion paint to match it for the front end. I have already purchased the paint but it is for the rear body and has no fusion in it.
Calvin |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Painting Roof | Body and Paint | |||
Roof Painting Question | Gas Yamaha | |||
plastic ramps | Gas Yamaha | |||
Plastic Repair | Body and Paint | |||
Plastic dye for my cart roof | Body and Paint |